Bondtech CHT® Coated Brass Nozzle, 0.4 mm

€19.99*

Content: 1 piece

In stock, delivery time 1-3 working days

Nozzle / Diameter
Product number: BTE-CHT-04
Packaging: 20 x 20 x 20 mm (0.05 kg)
Product information "Bondtech CHT® Coated Brass Nozzle, 0.4 mm"

Main Bondtech CHT® Advantages

  • Higher melt capacity by increasing the surface area of the heating walls
  • Affordable price
  • Machined with ultra-precision
  • Brass nozzle with Nickel coated surface
  • Follows nozzle standards:
    • RepRap (M6×1×7.5×12.5)
    • MK8 (M6×1×5×13)
  • May be used with 1.75 or 2.85mm hotends.

Advantages of the Bondtech CHT® technology:

Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.

Core Heating is a patented technology

Registration number: EP3445568A1
Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls.

Advantages of the Nickel Coating

A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

Voron / Extruder: Afterburner, Galileo, Jetpack, M4, Pocketwatch, Pocketwatch 2, StealthBurner
Voron / Model: Legacy, Switchwire, Trident, VORON0 V0.1, VORON1 V1.8, VORON2 V2.4
Voron / Spec: 120, 230, 250, 300, 350
Bill of Materials for "Bondtech CHT® Coated Brass Nozzle, 0.4 mm"
Our Bill Of Materials is a usefull tool while sourcing your VORON.
Model / Spec 120 230 250 300 350
VORON Legacy 1
VORON Switchwire 1
VORON Trident 1 1 1
VORON0 V0.1 1
VORON1 V1.8 1 1
VORON2 V2.4 1 1 1

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Customers also bought

OMRON D2F-5L Microswitch
Endstop Microswitch usable for X/Y/Z. Type: D2F-5LRating: 250 V/AC - 5A

€2.99*
Brass Heat Insert, 5 x 4 mm, M3
Brass heat inserts, specially developed for FDM 3D printed parts and post-insertion.

Content: 100 piece (€0.09* / 1 piece)

€8.99*
SSR DIN Rail Mounting Adapter
Adapter plate for mounting our SSR to our DIN rails.

€4.99*
Voron Nozzle Endstop
DIY Z Endstop PCB, requires custom printed part and soldering. Contents 1x PCB 1x 3-Pin JST-XH connector 1x Omron D2F-5L Hint Use our prepared connection cable Nozzle Endstop Wire Harness Downloads Z-Switch_FermioLabs_Rev1.stl Note: The pins of the connector and microswitch have to be cutted very flat before soldering!

€4.99*
Solid State Relay (SSR), DC/AC, 120/230 V/AC, 10 Ampere
This solid state relay can switch load currents in the range of 24-480VAC (usually 230V) up to currents of 10A. zero cross switching galvanic isolation (opto-isolator) touch protection (IP20) switching state signaling with LED Downloads A-Senco SSR-500-1DA48-10 Datasheet

€14.99*