Bondtech LGX® Lite Extruder (no motor)

StealthBurner RGB LED Kit, pre-wired. Total of three SK6812 RGBNW LEDs. Wire terminated with 3-pin Molex Microfit 3.0 connector. Hint Use our prepared connection cable StealthBurner RGB LED Wire Harness to update your wire harness. Note The M42 hexnut and 3D printed parts are not part of this kit and are pictured for demonstration purposes only.

Endstop Microswitch usable for X/Y/Z. Type: D2F-5LRating: 250 V/AC - 5A

Our black PEI sheets are backed with 3M™ 467 one-sided self-adhesive. They're made from SABIC ULTEM™ 1000 granulate and extruded by Dr. Dietrich Müller GmbH in Germany.

GraviFlex® magnetic foil 200, self-adhesive anisotropic multi-polarly magnetized operating temperature 120°C (up to 200°C temporary) Product characteristics Material thickness: 1 mm Remanence Br: 243 – 263 mT Coercivity HcB: 179 – 203 kA/m Coercivity HcJ: 211 – 257 kA/m Energy product (B × H)max.: 11,1 – 13,5 kJ/m³ Holding force: approx. 130 g/cm²

They are manufactured by Bondtech in-house, and will fit the following hotends/blocks: Mosquito® / Magnum Mosquito® Liquid Mosquito® Magnum+ Copperhead™ E3D Chimera and Kraken E3D V4, V5 and V6 blocks Prusa i3, Prusa Mini RepRap M6 Features 1 unit per pack; Available sizes : 0.40, 0.50, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench Main Bondtech CHT® Advantages Higher melt capacity by increasing the surface area of the heating walls Affordable price Machined with ultra-precision Brass nozzle with Nickel coated surface Follows nozzle standards: RepRap (M6×1×7.5×12.5) MK8 (M6×1×5×13) May be used with 1.75 or 2.85mm hotends. Advantages of the Bondtech CHT® technology: Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Core Heating is a patented technology Registration number: EP3445568A1Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls. Advantages of the Nickel Coating A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

Stealthburner Clockwork2 compatible Bondtech LGX Lite mount with igus energy chain mount. Note You are buying 3D printed parts only. Any additional hardware shown is for demonstration purposes only.