Bondtech LGX® Secondary Gear

€3.99*

In stock, delivery time 1-3 working days

€3.99*

Bondtech LGX® Secondary Gear
Product number: BTE-LGX-GEAR-SECONDARY
Packaging: 4 x 8 x 1 mm (0.01 kg)
Product information "Bondtech LGX® Secondary Gear"

Spare part made of self lubricant high temperature plastic to replace a secondary gear on a Bondtech LGX™ Large Gears eXtruder.

0 of 0 reviews

Write a review

Share your experiences with other customers.


Customers also bought

Top
Brass Heat Insert, 5 x 4 mm, M3
Brass Heat Insert, 5 x 4 mm, M3
Brass heat inserts, specially developed for FDM 3D printed parts and post-insertion.

Content: 100 piece (€0.09* / 1 piece)

€8.99*
Top
Round Neodym Magnets, 6 x 3 mm, N52, coated black, electrically non conductive
Round Neodym Magnets, 6 x 3 mm, N52, coated black, electrically non conductive

Content: 10 piece (€0.30* / 1 piece)

€2.99*
Top
TRI
igus® igubal® Spherical bearing, EGLM-05
igus® igubal® Spherical bearing, EGLM-05
Direct replacement for GE5C spherical bearings. igubal® spherical bearings The use of spherical bearings is usually associated with high weight bearing materials, difficult installation, and high costs. Most of the time, maintenance is still necessary over the long-term, and the bearings are only corrosion-resistant in special designs. Often roller bearings or plain bearings malfunction prematurely due to high edge loads, or because they need to be elaborately readjusted, reamed, or refitted in order to compensate for alignment errors. igubal® spherical bearings put an end to all of these disadvantages and open up many new possibilities for your engineering design: they are easy to handle, cost-effective, lightweight and robust. The housing is made from igumid G, an extremely impact-resistant, long-fibre-reinforced polymer. Suitable for temperatures from -30 °C to +80 °C in long-term use. In standard spherical bearings, the spherical ball is made from iglidur® W300 material, which is known for lowest coefficients of friction in dry operation and extremely low tendency to stick-slip. This is especially important for low loads and very slow movements. Compensation of misalignment and edge loads Corrosion-resistant High vibration-dampening Excellent vibration dampening Suitable for rotating, oscillating and axial movements Tolerances Maintenance-free igubal® spherical bearings have a tolerance in the inner diameter of E10. The shaft tolerance should be between h6 and h9. The bearing clearance allows for expansion of the bearings due to increasing temperatures. Assembly igubal® spherical bearings are press-fitted into a recommended H7 housing bore and axially secured. Exact alignment of the bearing housing is not necessary since the spherical bearing automatically compensates for alignment errors.

From €2.99*
Top
V24
TRI
Knurled Nut, M4, DIN466-B
Knurled Nut, M4, DIN466-B

€0.49*
Top
V18
Knurled Nut, M3, DIN466-B
Knurled Nut, M3, DIN466-B

€0.49*
Bondtech CHT® Coated Brass Nozzle, 0.5 mm
Bondtech CHT® Coated Brass Nozzle, 0.5 mm
They are manufactured by Bondtech in-house, and will fit the following hotends/blocks: Mosquito® / Magnum Mosquito® Liquid Mosquito® Magnum+ Copperhead™ E3D Chimera and Kraken E3D V4, V5 and V6 blocks Prusa i3, Prusa Mini RepRap M6 Features 1 unit per pack; Available sizes : 0.40, 0.50, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench Main Bondtech CHT® Advantages Higher melt capacity by increasing the surface area of the heating walls Affordable price Machined with ultra-precision Brass nozzle with Nickel coated surface Follows nozzle standards: RepRap (M6×1×7.5×12.5) MK8 (M6×1×5×13) May be used with 1.75 or 2.85mm hotends. Advantages of the Bondtech CHT® technology: Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Core Heating is a patented technology Registration number: EP3445568A1Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls. Advantages of the Nickel Coating A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

€19.99*