Bondtech LGX Steel Drive Train Upgrade Set

Endstop Microswitch usable for X/Y/Z. Type: D2F-5LRating: 250 V/AC - 5A

Fermio Labs miniature linear guideway; single rail cut to length with a single long block. Highest preload (Z1) and normal (N) precision guarantees a stiff / play-free and binding-free motion. Unlike most of the linear guideways produced in China, our blocks feature a functional injection hole / grease port for lubrication which is compatible with our lubrication kit. Warranty The blocks and rails are non-interchangeable - keep the blocks on the rails! A violation does expire warranty effectively. Cleaning We strongly recommend to clean the rails before lubrication. Put a zip tie through the very last holes to ensure the block can not escape the rail. Fill a glass with some grease solvent and soak the blocks for at least an hour. Rinse the blocks and wipe the rail from any residue grease with a lint-free cloth. Lubrication We recommend to lubricate the ball races and bearing balls with grease, and cover the entire rail itself in a thin coat of grease to prevent oxidation. Recommended lubricants (in no particular order): CPC Lubrication Kit 18G Fuchs Planto Multispray S Fuchs Lagermeister BF2 Mobilux EP 1 or EP 2 HIWIN G05 Note: lubricants containing MoS2 or graphite must not be used.

Tophat panel set made from laser cut acrylic (PMMA) sheets for the VORON0 V0.2. All panels are 3mm thick. Tophat height 100mm. Contents 4pcs side panels (212mm x 91mm) 1pcs top panel (212mm x 212mm) Cleaning Note don't use isopropanol or similar! only with water or special PMMA cleaner is allowed

Enclosure panel set made from CNC machined aluminium composite panel sheets for the VORON0.2 With our "easy-slot-cut" the deck panel easily fits into the extrusion slot without big force. All panels are 3mm thick. Contents 1pcs deck panel (no print) 1pcs middle panel 2pcs back panels (top & bottom) 1pcs motor panel1pcs bottom panel Cleaning Note don't use isopropanol or similar! only with water is allowed

Optical sensor PCB for TAP including adapter cable to our wire harness for Plug&Play The design includes a supply polarity and overshoot protection.Technical Data 12V or 24V supply Open drain signal output Optional 10k pull-up (against internal +5V) on signal output (via solder bridge) OPB971N51 sensor Contents 1x full assembled and 100% tested PCB 1x short cable (JST-PH => Molex Microfit 3.0)

Spare part for the Bondtech LGX® Lite. Front housing made of grey Polyamide without dyeing. Features a wax protective coating and the LGX® Lite BONDTECH sticker.