Copper and Hardened Vanadium Steel nozzles for high flow applications with abrasive materials. They are manufactured by Bondtech in-house, and will fit the following hotends/blocks: Mosquito® / Magnum Mosquito® Liquid Mosquito® Magnum+ Copperhead™ E3D Chimera and Kraken E3D V4, V5 and V6 blocks Prusa i3, Prusa Mini RepRap M6 Features Copper body; Hardened Vanadium Steel inserts Nickel Coating 1 unit per pack; Available sizes : 0.40, 0.60, 0.80 and 1.0mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench Main Bondtech CHT® BiMetall Advantages Abrasive-proof to work with Carbon and Glass fiber composite materials; Higher melt capacity by increasing the surface area of the heating walls Flow Rate gains between 25 and 65% Competitive price/performance price Machined with ultra-precision Copper body and Hardened Vanadium Steel inserts nozzle with Nickel coated surface Follows nozzle standards: RepRap (M6×1×7.5×12.5) MK8 (M6×1×5×13) May be used with 1.75 or 2.85mm hotends. Flow Rate gains may vary. Results depend on the hardware, materials and print settings used. Advantages of the Bondtech CHT® technology: Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Core Heating is a patented technology Registration number: EP3445568A1Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls. Advantages of the Nickel Coating A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

Copper and Hardened Vanadium Steel nozzles for high flow applications with abrasive materials. They are manufactured by Bondtech in-house, and will fit the following hotends/blocks: Mosquito® / Magnum Mosquito® Liquid Mosquito® Magnum+ Copperhead™ E3D Chimera and Kraken E3D V4, V5 and V6 blocks Prusa i3, Prusa Mini RepRap M6 Features Copper body; Hardened Vanadium Steel inserts Nickel Coating 1 unit per pack; Available sizes : 0.40, 0.60, 0.80 and 1.0mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench Main Bondtech CHT® BiMetall Advantages Abrasive-proof to work with Carbon and Glass fiber composite materials; Higher melt capacity by increasing the surface area of the heating walls Flow Rate gains between 25 and 65% Competitive price/performance price Machined with ultra-precision Copper body and Hardened Vanadium Steel inserts nozzle with Nickel coated surface Follows nozzle standards: RepRap (M6×1×7.5×12.5) MK8 (M6×1×5×13) May be used with 1.75 or 2.85mm hotends. Flow Rate gains may vary. Results depend on the hardware, materials and print settings used. Advantages of the Bondtech CHT® technology: Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Core Heating is a patented technology Registration number: EP3445568A1Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls. Advantages of the Nickel Coating A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

Copper and Hardened Vanadium Steel nozzles for high flow applications with abrasive materials. They are manufactured by Bondtech in-house, and will fit the following hotends/blocks: Mosquito® / Magnum Mosquito® Liquid Mosquito® Magnum+ Copperhead™ E3D Chimera and Kraken E3D V4, V5 and V6 blocks Prusa i3, Prusa Mini RepRap M6 Features Copper body; Hardened Vanadium Steel inserts Nickel Coating 1 unit per pack; Available sizes : 0.40, 0.60, 0.80 and 1.0mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench Main Bondtech CHT® BiMetall Advantages Abrasive-proof to work with Carbon and Glass fiber composite materials; Higher melt capacity by increasing the surface area of the heating walls Flow Rate gains between 25 and 65% Competitive price/performance price Machined with ultra-precision Copper body and Hardened Vanadium Steel inserts nozzle with Nickel coated surface Follows nozzle standards: RepRap (M6×1×7.5×12.5) MK8 (M6×1×5×13) May be used with 1.75 or 2.85mm hotends. Flow Rate gains may vary. Results depend on the hardware, materials and print settings used. Advantages of the Bondtech CHT® technology: Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Core Heating is a patented technology Registration number: EP3445568A1Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls. Advantages of the Nickel Coating A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

Copper and Hardened Vanadium Steel nozzles for high flow applications with abrasive materials. They are manufactured by Bondtech in-house, and will fit the following hotends/blocks: Mosquito® / Magnum Mosquito® Liquid Mosquito® Magnum+ Copperhead™ E3D Chimera and Kraken E3D V4, V5 and V6 blocks Prusa i3, Prusa Mini RepRap M6 Features Copper body; Hardened Vanadium Steel inserts Nickel Coating 1 unit per pack; Available sizes : 0.40, 0.60, 0.80 and 1.0mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench Main Bondtech CHT® BiMetall Advantages Abrasive-proof to work with Carbon and Glass fiber composite materials; Higher melt capacity by increasing the surface area of the heating walls Flow Rate gains between 25 and 65% Competitive price/performance price Machined with ultra-precision Copper body and Hardened Vanadium Steel inserts nozzle with Nickel coated surface Follows nozzle standards: RepRap (M6×1×7.5×12.5) MK8 (M6×1×5×13) May be used with 1.75 or 2.85mm hotends. Flow Rate gains may vary. Results depend on the hardware, materials and print settings used. Advantages of the Bondtech CHT® technology: Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Core Heating is a patented technology Registration number: EP3445568A1Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls. Advantages of the Nickel Coating A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

They are manufactured by Bondtech in-house, and will fit the following hotends/blocks: Mosquito® / Magnum Mosquito® Liquid Mosquito® Magnum+ Copperhead™ E3D Chimera and Kraken E3D V4, V5 and V6 blocks Prusa i3, Prusa Mini RepRap M6 Features 1 unit per pack; Available sizes : 0.40, 0.50, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench Main Bondtech CHT® Advantages Higher melt capacity by increasing the surface area of the heating walls Affordable price Machined with ultra-precision Brass nozzle with Nickel coated surface Follows nozzle standards: RepRap (M6×1×7.5×12.5) MK8 (M6×1×5×13) May be used with 1.75 or 2.85mm hotends. Advantages of the Bondtech CHT® technology: Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Core Heating is a patented technology Registration number: EP3445568A1Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls. Advantages of the Nickel Coating A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

They are manufactured by Bondtech in-house, and will fit the following hotends/blocks: Mosquito® / Magnum Mosquito® Liquid Mosquito® Magnum+ Copperhead™ E3D Chimera and Kraken E3D V4, V5 and V6 blocks Prusa i3, Prusa Mini RepRap M6 Features 1 unit per pack; Available sizes : 0.40, 0.50, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench Main Bondtech CHT® Advantages Higher melt capacity by increasing the surface area of the heating walls Affordable price Machined with ultra-precision Brass nozzle with Nickel coated surface Follows nozzle standards: RepRap (M6×1×7.5×12.5) MK8 (M6×1×5×13) May be used with 1.75 or 2.85mm hotends. Advantages of the Bondtech CHT® technology: Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Core Heating is a patented technology Registration number: EP3445568A1Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls. Advantages of the Nickel Coating A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

They are manufactured by Bondtech in-house, and will fit the following hotends/blocks: Mosquito® / Magnum Mosquito® Liquid Mosquito® Magnum+ Copperhead™ E3D Chimera and Kraken E3D V4, V5 and V6 blocks Prusa i3, Prusa Mini RepRap M6 Features 1 unit per pack; Available sizes : 0.40, 0.50, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench Main Bondtech CHT® Advantages Higher melt capacity by increasing the surface area of the heating walls Affordable price Machined with ultra-precision Brass nozzle with Nickel coated surface Follows nozzle standards: RepRap (M6×1×7.5×12.5) MK8 (M6×1×5×13) May be used with 1.75 or 2.85mm hotends. Advantages of the Bondtech CHT® technology: Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Core Heating is a patented technology Registration number: EP3445568A1Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls. Advantages of the Nickel Coating A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

They are manufactured by Bondtech in-house, and will fit the following hotends/blocks: Mosquito® / Magnum Mosquito® Liquid Mosquito® Magnum+ Copperhead™ E3D Chimera and Kraken E3D V4, V5 and V6 blocks Prusa i3, Prusa Mini RepRap M6 Features 1 unit per pack; Available sizes : 0.40, 0.50, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench Main Bondtech CHT® Advantages Higher melt capacity by increasing the surface area of the heating walls Affordable price Machined with ultra-precision Brass nozzle with Nickel coated surface Follows nozzle standards: RepRap (M6×1×7.5×12.5) MK8 (M6×1×5×13) May be used with 1.75 or 2.85mm hotends. Advantages of the Bondtech CHT® technology: Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Core Heating is a patented technology Registration number: EP3445568A1Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls. Advantages of the Nickel Coating A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

They are manufactured by Bondtech in-house, and will fit the following hotends/blocks: Mosquito® / Magnum Mosquito® Liquid Mosquito® Magnum+ Copperhead™ E3D Chimera and Kraken E3D V4, V5 and V6 blocks Prusa i3, Prusa Mini RepRap M6 Features 1 unit per pack; Available sizes : 0.40, 0.50, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench Main Bondtech CHT® Advantages Higher melt capacity by increasing the surface area of the heating walls Affordable price Machined with ultra-precision Brass nozzle with Nickel coated surface Follows nozzle standards: RepRap (M6×1×7.5×12.5) MK8 (M6×1×5×13) May be used with 1.75 or 2.85mm hotends. Advantages of the Bondtech CHT® technology: Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Core Heating is a patented technology Registration number: EP3445568A1Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls. Advantages of the Nickel Coating A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

They are manufactured by Bondtech in-house, and will fit the following hotends/blocks: Mosquito® / Magnum Mosquito® Liquid Mosquito® Magnum+ Copperhead™ E3D Chimera and Kraken E3D V4, V5 and V6 blocks Prusa i3, Prusa Mini RepRap M6 Features 1 unit per pack; Available sizes : 0.40, 0.50, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench Main Bondtech CHT® Advantages Higher melt capacity by increasing the surface area of the heating walls Affordable price Machined with ultra-precision Brass nozzle with Nickel coated surface Follows nozzle standards: RepRap (M6×1×7.5×12.5) MK8 (M6×1×5×13) May be used with 1.75 or 2.85mm hotends. Advantages of the Bondtech CHT® technology: Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Core Heating is a patented technology Registration number: EP3445568A1Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls. Advantages of the Nickel Coating A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

They are manufactured by Bondtech in-house, and will fit the following hotends/blocks: Mosquito® / Magnum Mosquito® Liquid Mosquito® Magnum+ Copperhead™ E3D Chimera and Kraken E3D V4, V5 and V6 blocks Prusa i3, Prusa Mini RepRap M6 Features 1 unit per pack; Available sizes : 0.40, 0.50, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench Main Bondtech CHT® Advantages Higher melt capacity by increasing the surface area of the heating walls Affordable price Machined with ultra-precision Brass nozzle with Nickel coated surface Follows nozzle standards: RepRap (M6×1×7.5×12.5) MK8 (M6×1×5×13) May be used with 1.75 or 2.85mm hotends. Advantages of the Bondtech CHT® technology: Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Core Heating is a patented technology Registration number: EP3445568A1Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls. Advantages of the Nickel Coating A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

Bondtech drive gear kit in hardened and surface protected steel. Precision cnc-machined. Super sharp teeths for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with abrasive filaments. These drivegear kits come as a set consisting of a primary drive gear, a secondary drive gear, bearings and a shaft. Gear set for filament size 1.75 mm, primary gear with inner diameter 5 mm, secondary gear with two needle bearings, M3x2 setscrew and one 3x20 mm shaft. Gear set for filament size 1.75 mm, primary gear with inner diameter 8 mm, secondary gear with integrated needle bearings, M4x3 setscrew and one 4x22 mm shaft. Gear set for filament size 2.85 – 3.0 mm, primary gear with inner diameter 8 mm, secondary gear with integrated needle bearings, M4x3 setscrew and one 4x22 mm shaft. A Lithium based grease is recommended to use on the gear section and inside the needle bearings for low friction and to avoid wear. A small dab of grease is enough.

The Bondtech LGX® Large Gears eXtruder is the first of our filament feeders using Bondtech’s new Dual Drive Technology based on larger drive gears.

Includes full size LGX® Large Gears, maintenance windows and filament tension lever with 3 presets (open; rigid; flexible). Important Use the LGX® Lite only with a 36mm Round stepper motor featuring a 10 teeth motor gear. Stealthburner If you're looking for a really nice Stealthburner mount, checkout this mod: https://github.com/Eytecz/LGX_Lite_Stealthburner_CW2_style_mount/  

The Bondtech LGX® Lite is a filament feeder based on the LGX® Large Gears eXtruder and uses Bondtech’s new Dual Drive Technology based on larger drive gears. Stealthburner If you're looking for a really nice Stealthburner mount, checkout this mod: https://github.com/Eytecz/LGX_Lite_Stealthburner_CW2_style_mount/

Replacement Shaft assembly for our Bondtech Mini Geared (BMG), SingleDirect and DualDirect extruders. It includes the set screw for primary 1.75/5.0 drive gear.Note: New improved revision from Bondtech, where the gear wheel is in white now! For more information see link

Thumbscrew replacement for Bondtech extruder.

Brass heat inserts, specially developed for FDM 3D printed parts and post-insertion.

E3D developed this Revo-compatible cold side in collaboration with Team Voron. It’s intended for use with the Voron StealthBurner, which includes an integrated cold side fan. It’s compatible with their Revo ecosystem, so you can change nozzle size without tools or hot tightening using just your fingers. Uses Revo Nozzles – change nozzles cold, no tools, no hot tightening Works with a Revo HeaterCore for faster heat-ups Rigid mounting using 4 x M3 x 0.5 bolts Ultra-lightweight construction for improved speed performance Ideal HotEnd for Voron StealthBurner Ready for Revo A groove at the bottom of the sink accepts a Revo HeaterCore spring. It’s compatible with our Revo ecosystem, so you can change nozzles without tools or hot tightening using just your fingers. Complements your Voron Includes an anodised red aluminium heatsink to complement your Voron accented parts. Rigid mounting This is a rigid mounted design that uses four M3 x 0.5 bolts to secure to your Voron 3D printer. Wire harness compatibility Please note that this is a custom production. The Thermistor and HeaterCore are wired to match our wire harness.

Standard: UL 248-14(M) Medium time-lagCylindrical, 5 x 20 mm125 V / 250 V Voltage10.000A @ 125V / 200A @ 250V Breaking capacity

Miniature ball bearings are deep groove ball bearings in small. Their dimensions make them suitable for special applications. In addition, they allow very high speeds with low noise.

Genuine Gates PowerGrip® GT® 2 open belts. Low dust and vibration variant (RF). Contents 1 pcs. Gates PowerGrip® GT® 2 Open Belt (segments of 5 meter) Note Please be aware that we sell only segments of 5 meter length. We do not offer different lengths!

Contents 1 pcs. Gates PowerGrip® GT® 2 Pulley 2 pcs. M3/M4 Grub Screw (depends)