Filter
–
Sold out
Top
ALL
Bondtech Drive Gear Set, 1.75 mm Filament, 5 mm Shaft
Bondtech / Drive Gear: 1.75 mm / 5 mm
Bondtech drive gear kit in hardened and surface protected steel. Precision cnc-machined. Super sharp teeths for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with abrasive filaments. These drivegear kits come as a set consisting of a primary drive gear, a secondary drive gear, bearings and a shaft. Gear set for filament size 1.75 mm, primary gear with inner diameter 5 mm, secondary gear with two needle bearings, M3x2 setscrew and one 3x20 mm shaft. Gear set for filament size 1.75 mm, primary gear with inner diameter 8 mm, secondary gear with integrated needle bearings, M4x3 setscrew and one 4x22 mm shaft. Gear set for filament size 2.85 – 3.0 mm, primary gear with inner diameter 8 mm, secondary gear with integrated needle bearings, M4x3 setscrew and one 4x22 mm shaft. A Lithium based grease is recommended to use on the gear section and inside the needle bearings for low friction and to avoid wear. A small dab of grease is enough.
€31.99*
Sold out
Top
Bondtech Push-Fit ECAS 4 mm
Push-fit ECAS 4mm is a Bondtech Spare Part to use on the BMG Extruder and on the DDS for CR-10S when a replacement is needed. Size 4 mm is used with 1.75 mm filament.
€1.99*
Sold out
Top
ALL
Top
ALL
Brass Heat Insert, 5 x 4 mm, M3
Brass heat inserts, specially developed for FDM 3D printed parts and post-insertion.
Content: 100 piece (€0.09* / 1 piece)
€8.99*
Top
ALL
F 695 ZZ / F695 ZZ, 5 x 13 x 4 mm, Miniature Flanged Ball Bearing From €1.99*
Bearings: F695-ZZ
Miniature ball bearings are deep groove ball bearings in small. Their dimensions make them suitable for special applications. In addition, they allow very high speeds with low noise.
Variants from €0.99*
Top
V24
Gates Powergrip® 2GT Belt Loop, 6 mm wide, 188 teeth
Belt / Tooth: 188 | Belt / Width: 6 mm
Genuine Gates PowerGrip® GT® 2 belt loops. Low dust and vibration variant (RF). Contents 1 pcs. Gates PowerGrip® GT® 2 Belt Loop
€2.99*
Only 7 available
Top
ALL
Gates Powergrip® 2GT Pulley, 20 tooth, 6 mm wide, 5 mm bore, black €4.99*
Belt / Width: 6 mm | Pulley / Bore: 5 mm | Pulley / Color: black | Pulley / Tooth: 20
Contents 1 pcs. Gates PowerGrip® GT® 2 Pulley 2 pcs. M3/M4 Grub Screw (depends)
Variants from €3.99*
Top
ALL
Gates Powergrip® 2GT Pulley, 20 tooth, 6 mm wide, 5 mm bore, natural
Belt / Width: 6 mm | Pulley / Bore: 5 mm | Pulley / Color: natural | Pulley / Tooth: 20
Contents 1 pcs. Gates PowerGrip® GT® 2 Pulley 2 pcs. M3/M4 Grub Screw (depends)
€3.99*
K3
V24
Gates Powergrip® 2GT Pulley, 80 tooth, 6 mm wide, 5 mm bore, black €9.99*
Belt / Width: 6 mm | Pulley / Bore: 5 mm | Pulley / Color: black | Pulley / Tooth: 80
Contents 1 pcs. Gates PowerGrip® GT® 2 Pulley 2 pcs. M3/M4 Grub Screw (depends)
Variants from €3.99*
Top
K3
V24
Gates Powergrip® 2GT Pulley, 80 tooth, 6 mm wide, 5 mm bore, natural €8.99*
Belt / Width: 6 mm | Pulley / Bore: 5 mm | Pulley / Color: natural | Pulley / Tooth: 80
Contents 1 pcs. Gates PowerGrip® GT® 2 Pulley 2 pcs. M3/M4 Grub Screw (depends)
Variants from €3.99*
Misumi Mobius Drive Shaft, 50 mm, Full D-Cut
Drive Shaft / Length: 50 mm
Diameter: 5 mm (g6, ground)Length: 50/60 mm (~0.3mm)Roundness: 0.004mmStraightness: 0.1/100Surface roughness: 1.6Surface treatment: black burnished Material: EN 1.1191 equivalent
€7.99*