Go to homepage
My account
Login
Register
Overview Your profile Addresses Payment methods Orders
€0.00*
Home
Soon
New
Top
Sale
Consumables
Essentials
Voron Design
Partners
Show all Consumables
Filament
Material
ABS
Manufacturer
KVP
Hotends
Nozzles
Lubricants
Show all Essentials
Electronics
Endstops
Hall Effect Sensors
Inductive Sensors
Microswitches
RGB LEDs
Silicone Heaters
Solid-State Relay
Stepper Motors
Wire Harness
Enclosures
Acrylic (PMMA)
Aluminium Composite
Extruding
Extruders
Hotends
Mechanical
Aluminium Plates
Bearings
Build Plates
DIN Rails
Drive Shafts
Energy Chains
Frames
Linear Bushings
Linear Rails
CPC
FLG
RDG
Linear Shafts
Magnets
PEI Sheets
Printed Parts
Probe Shafts
Spring Steel Sheets
T-Slot Nuts
Fasteners
Show all Voron Design
3D Printers
VORON Legacy
VORON Switchwire
VORON Trident
VORON0 V0.1
VORON1 V1.8
VORON2 V2.4
Extruders
Afterburner
Galileo
Jetpack
M4
Pocketwatch 2
StealthBurner
Show all categories Consumables Back
  • Show Consumables
  • Filament
  • Hotends
  • Lubricants
  1. Consumables
  • Soon
  • New
  • Top
  • Sale
  • Consumables
    • Filament
    • Hotends
    • Lubricants
  • Essentials
  • Voron Design
  • Partners
Filter
–
Top
Bondtech CHT® Coated Brass Nozzle, 0.4 mm
Bondtech CHT® Coated Brass Nozzle, 0.4 mm
Nozzle / Diameter: 0.4 mm
They are manufactured by Bondtech in-house, and will fit the following hotends/blocks: Mosquito® / Magnum Mosquito® Liquid Mosquito® Magnum+ Copperhead™ E3D Chimera and Kraken E3D V4, V5 and V6 blocks Prusa i3, Prusa Mini RepRap M6 Features 1 unit per pack; Available sizes : 0.40, 0.50, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench Main Bondtech CHT® Advantages Higher melt capacity by increasing the surface area of the heating walls Affordable price Machined with ultra-precision Brass nozzle with Nickel coated surface Follows nozzle standards: RepRap (M6×1×7.5×12.5) MK8 (M6×1×5×13) May be used with 1.75 or 2.85mm hotends. Advantages of the Bondtech CHT® technology: Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Core Heating is a patented technology Registration number: EP3445568A1Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls. Advantages of the Nickel Coating A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

€19.99*
Bondtech CHT® Coated Brass Nozzle, 0.5 mm
Bondtech CHT® Coated Brass Nozzle, 0.5 mm
Nozzle / Diameter: 0.5 mm
They are manufactured by Bondtech in-house, and will fit the following hotends/blocks: Mosquito® / Magnum Mosquito® Liquid Mosquito® Magnum+ Copperhead™ E3D Chimera and Kraken E3D V4, V5 and V6 blocks Prusa i3, Prusa Mini RepRap M6 Features 1 unit per pack; Available sizes : 0.40, 0.50, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench Main Bondtech CHT® Advantages Higher melt capacity by increasing the surface area of the heating walls Affordable price Machined with ultra-precision Brass nozzle with Nickel coated surface Follows nozzle standards: RepRap (M6×1×7.5×12.5) MK8 (M6×1×5×13) May be used with 1.75 or 2.85mm hotends. Advantages of the Bondtech CHT® technology: Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Core Heating is a patented technology Registration number: EP3445568A1Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls. Advantages of the Nickel Coating A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

€19.99*
Top
Bondtech CHT® Coated Brass Nozzle, 0.6 mm
Bondtech CHT® Coated Brass Nozzle, 0.6 mm
Nozzle / Diameter: 0.6 mm
They are manufactured by Bondtech in-house, and will fit the following hotends/blocks: Mosquito® / Magnum Mosquito® Liquid Mosquito® Magnum+ Copperhead™ E3D Chimera and Kraken E3D V4, V5 and V6 blocks Prusa i3, Prusa Mini RepRap M6 Features 1 unit per pack; Available sizes : 0.40, 0.50, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench Main Bondtech CHT® Advantages Higher melt capacity by increasing the surface area of the heating walls Affordable price Machined with ultra-precision Brass nozzle with Nickel coated surface Follows nozzle standards: RepRap (M6×1×7.5×12.5) MK8 (M6×1×5×13) May be used with 1.75 or 2.85mm hotends. Advantages of the Bondtech CHT® technology: Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Core Heating is a patented technology Registration number: EP3445568A1Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls. Advantages of the Nickel Coating A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

€19.99*
Bondtech CHT® Coated Brass Nozzle, 0.8 mm
Bondtech CHT® Coated Brass Nozzle, 0.8 mm
Nozzle / Diameter: 0.8 mm
They are manufactured by Bondtech in-house, and will fit the following hotends/blocks: Mosquito® / Magnum Mosquito® Liquid Mosquito® Magnum+ Copperhead™ E3D Chimera and Kraken E3D V4, V5 and V6 blocks Prusa i3, Prusa Mini RepRap M6 Features 1 unit per pack; Available sizes : 0.40, 0.50, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench Main Bondtech CHT® Advantages Higher melt capacity by increasing the surface area of the heating walls Affordable price Machined with ultra-precision Brass nozzle with Nickel coated surface Follows nozzle standards: RepRap (M6×1×7.5×12.5) MK8 (M6×1×5×13) May be used with 1.75 or 2.85mm hotends. Advantages of the Bondtech CHT® technology: Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Core Heating is a patented technology Registration number: EP3445568A1Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls. Advantages of the Nickel Coating A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

€19.99*
Bondtech CHT® Coated Brass Nozzle, 1.0 mm
Bondtech CHT® Coated Brass Nozzle, 1.0 mm
Nozzle / Diameter: 1.0 mm
They are manufactured by Bondtech in-house, and will fit the following hotends/blocks: Mosquito® / Magnum Mosquito® Liquid Mosquito® Magnum+ Copperhead™ E3D Chimera and Kraken E3D V4, V5 and V6 blocks Prusa i3, Prusa Mini RepRap M6 Features 1 unit per pack; Available sizes : 0.40, 0.50, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench Main Bondtech CHT® Advantages Higher melt capacity by increasing the surface area of the heating walls Affordable price Machined with ultra-precision Brass nozzle with Nickel coated surface Follows nozzle standards: RepRap (M6×1×7.5×12.5) MK8 (M6×1×5×13) May be used with 1.75 or 2.85mm hotends. Advantages of the Bondtech CHT® technology: Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Core Heating is a patented technology Registration number: EP3445568A1Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls. Advantages of the Nickel Coating A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

€19.99*
Bondtech CHT® Coated Brass Nozzle, 1.4 mm
Bondtech CHT® Coated Brass Nozzle, 1.4 mm
Nozzle / Diameter: 1.4 mm
They are manufactured by Bondtech in-house, and will fit the following hotends/blocks: Mosquito® / Magnum Mosquito® Liquid Mosquito® Magnum+ Copperhead™ E3D Chimera and Kraken E3D V4, V5 and V6 blocks Prusa i3, Prusa Mini RepRap M6 Features 1 unit per pack; Available sizes : 0.40, 0.50, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench Main Bondtech CHT® Advantages Higher melt capacity by increasing the surface area of the heating walls Affordable price Machined with ultra-precision Brass nozzle with Nickel coated surface Follows nozzle standards: RepRap (M6×1×7.5×12.5) MK8 (M6×1×5×13) May be used with 1.75 or 2.85mm hotends. Advantages of the Bondtech CHT® technology: Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Core Heating is a patented technology Registration number: EP3445568A1Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls. Advantages of the Nickel Coating A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

€19.99*
Bondtech CHT® Coated Brass Nozzle, 1.8 mm
Bondtech CHT® Coated Brass Nozzle, 1.8 mm
Nozzle / Diameter: 1.8 mm
They are manufactured by Bondtech in-house, and will fit the following hotends/blocks: Mosquito® / Magnum Mosquito® Liquid Mosquito® Magnum+ Copperhead™ E3D Chimera and Kraken E3D V4, V5 and V6 blocks Prusa i3, Prusa Mini RepRap M6 Features 1 unit per pack; Available sizes : 0.40, 0.50, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench Main Bondtech CHT® Advantages Higher melt capacity by increasing the surface area of the heating walls Affordable price Machined with ultra-precision Brass nozzle with Nickel coated surface Follows nozzle standards: RepRap (M6×1×7.5×12.5) MK8 (M6×1×5×13) May be used with 1.75 or 2.85mm hotends. Advantages of the Bondtech CHT® technology: Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Core Heating is a patented technology Registration number: EP3445568A1Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls. Advantages of the Nickel Coating A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

€19.99*
Top
CPC Lubrication Kit, 18G
CPC Lubrication Kit, 18G

€18.99*
More details
KVP ABS, Stellar Black, 1.75 mm, 1 kg
KVP ABS, Stellar Black, 1.75 mm, 1 kg
Filament / Spool Size: 1 kg | Filament / Diameter: 1.75 mm | Filament / KVP / ABS / Color: Stellar Black
Acrylonitrile Butadiene Styrene (ABS) filament is one of the most common 3D printing materials used in the 3D printing industry. Recommended for high strength applications. Keene Village Plastics’ ABS (Acrylonitrile Butadiene Styrene) allows you to deliver quality and quantity for every project. As your ABS 3D printer filament supplier, you can be sure of competitive pricing and, most of all, successful prints on high-strength applications. Features & Benefits Resilient Heat resistance Durable Mild flexible Can be sanded or smoothed with additional process

€34.99*
More details
KVP ABS, Stellar Blue, 1.75 mm, 1 kg
KVP ABS, Stellar Blue, 1.75 mm, 1 kg
Filament / Spool Size: 1 kg | Filament / Diameter: 1.75 mm | Filament / KVP / ABS / Color: Stellar Blue
Acrylonitrile Butadiene Styrene (ABS) filament is one of the most common 3D printing materials used in the 3D printing industry. Recommended for high strength applications. Keene Village Plastics’ ABS (Acrylonitrile Butadiene Styrene) allows you to deliver quality and quantity for every project. As your ABS 3D printer filament supplier, you can be sure of competitive pricing and, most of all, successful prints on high-strength applications. Features & Benefits Resilient Heat resistance Durable Mild flexible Can be sanded or smoothed with additional process

€34.99*
More details
KVP ABS, Stellar Red, 1.75 mm, 1 kg
KVP ABS, Stellar Red, 1.75 mm, 1 kg
Filament / Spool Size: 1 kg | Filament / Diameter: 1.75 mm | Filament / KVP / ABS / Color: Stellar Red
Acrylonitrile Butadiene Styrene (ABS) filament is one of the most common 3D printing materials used in the 3D printing industry. Recommended for high strength applications. Keene Village Plastics’ ABS (Acrylonitrile Butadiene Styrene) allows you to deliver quality and quantity for every project. As your ABS 3D printer filament supplier, you can be sure of competitive pricing and, most of all, successful prints on high-strength applications. Features & Benefits Resilient Heat resistance Durable Mild flexible Can be sanded or smoothed with additional process

€34.99*
More details
KVP ABS, Voron Red, 1.75 mm, 1 kg
KVP ABS, Voron Red, 1.75 mm, 1 kg
Filament / Spool Size: 1 kg | Filament / Diameter: 1.75 mm | Filament / KVP / ABS / Color: Voron Red
Acrylonitrile Butadiene Styrene (ABS) filament is one of the most common 3D printing materials used in the 3D printing industry. Recommended for high strength applications. Keene Village Plastics’ ABS (Acrylonitrile Butadiene Styrene) allows you to deliver quality and quantity for every project. As your ABS 3D printer filament supplier, you can be sure of competitive pricing and, most of all, successful prints on high-strength applications. Features & Benefits Resilient Heat resistance Durable Mild flexible Can be sanded or smoothed with additional process

€34.99*
More details
Legal
  • Imprint
  • Terms of service
  • Privacy policy
  • Cancellation policy
Infos
  • Technical data sheets
  • Shipping and payment
  • Contact us
  • About us
Service
  • Help desk
  • Knowledge base
  • Newsletter
  • Uptime
Social
  • Discord
  • Facebook
  • Instagram
  • Twitter
PayPal
Bancontact
Giropay
KBC/CBC Payment Button
Pay later.
eps
Belfius
Slice it.
SOFORT Banking
Apple Pay
Credit card
iDEAL
Przelewy24
  • Information obligations pursuant to Section 18 (2) of the Electrical and Electronic Equipment Act

* All prices incl. VAT plus shipping costs and possible delivery charges, if not stated otherwise.

© 2022 Fermio Labs GmbH.
This website uses cookies to ensure the best experience possible. More information...