CPC MR 12ML, 400 mm

€84.99*

Content: 1 piece

Out of stock

Linear Guide / Rail / Width
Linear Guide / Block / Type
Linear Guide / Rail / Length
Product number: CPC-MR12ML-400
Packaging: 30 x 450 x 20 mm (0.3 kg)
Product information "CPC MR 12ML, 400 mm"

Genuine CPC miniature linear guideway; single rail cut to length with a single long block. Highest preload (V1) and normal (N) precision guarantees a stiff / play-free and binding-free motion. The blocks feature an injection hole for lubrication and a seal from all sides (even the bottom).

Warranty

The blocks and rails are non-interchangeable - keep the blocks on the rails! A violation does expire warranty effectively.

Cleaning

We strongly recommend to clean the rails before lubrication. Put a zip tie through the very last holes to ensure the block can not escape the rail. Fill a glass with some grease solvent and soak the blocks for at least an hour. Rinse the blocks and wipe the rail from any residue grease with a lint-free cloth.

Lubrication

We recommend to lubricate the ball races and bearing balls with grease, and cover the entire rail itself in a thin coat of grease to prevent oxidation. Recommended lubricants (in no particular order):

Note: lubricants containing MoS2 or graphite must not be used.

Linear Guide / Block / Type: Long
Linear Guide / Rail / Length: 400 mm
Linear Guide / Rail / Width: 12 mm
Voron / Model: Trident
Voron / Spec: 350
Bill of Materials for "CPC MR 12ML, 400 mm"
Our Bill Of Materials is a usefull tool while sourcing your VORON.
Model / Spec 120 230 250 300 350
VORON Legacy
VORON Switchwire
VORON Trident 1
VORON0 V0.1
VORON1 V1.8
VORON2 V2.4

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Cutsomers also bought

V24
TRI
Spring Steel Sheet, 355 x 355 mm
A fitting PEI sheet you can find here: PEI

Variants from €5.99*
€19.99*
SSR DIN Rail Mounting Adapter
Adapter plate for mounting our SSR to our DIN rails.

€4.99*
V24
TRI
Müller Tecfilm® Ultem® 1000, PEI sheet, 365 x 365 mm, black
Our black PEI sheets are backed with 3M™ 467 one-sided self-adhesive. They're made from SABIC ULTEM™ 1000 granulate and extruded by Dr. Dietrich Müller GmbH in Germany.

Variants from €5.99*
€19.99*
V24
TRI
Keenovo Silicone Heatmat, 340 x 340 mm, 230 V/AC, 500 W
The silicone heatmats were custom designed by Fermio Labs and made to spec by Keenovo. All heaters are optimized for our build plates shapes and hole positions. They allow even heating almost all the way to the edges of the build plate. The power is adjusted to allow running them at 100 % power without risking damage to the build plate instead of the 50% to 80% PWM limit recommended for the heaters listed on the BOM. The standard DIN466 thumb nuts used in all Voron printers used as spacers (VORON2) or levelling nuts (Trident, VORON0 and VORON1) can be used as guides to align the heater. For added safety all heaters come with a self resetting bi-metal 150C thermostat. This turns off the heater if temperatures reaches 150 C due to technical failure of your electronics (only meant as a safety feature, not for temperature regulation). Thermistor used is a NTC 100K thermistor (Beta 25/50 3950K-1%, click herefor the R-T datasheet) Choose type 11 or 13 in Marlin firmware. Use "NTC 100K beta 3950" in Klipper. SKU/Model Compatibility Dimensions Voltage Watt Ampere Thermostat FLG-VRN-KNV-110 VORON0 110 x 110 mm 24 V/DC 60 W 2.5 A 150° C FLG-VRN-KNV-240 Trident, VORON1, VORON2 240 x 240 mm 230 V/AC 300 W 1.3 A 150° C FLG-VRN-KNV-290 Trident, VORON1, VORON2 290 x 290 mm 230 V/AC 400 W 1.7 A 150° C FLG-VRN-KNV-340 Trident, VORON2 340 x 340 mm 230 V/AC 500 W 2.1 A 150° C

Variants from €24.99*
€84.99*
OMRON D2F-5L Microswitch
Endstop Microswitch usable for X/Y/Z. Type: D2F-5LRating: 250 V/AC - 5A

€2.99*
Brass Heat Insert, 5 x 4 mm, M3
Brass heat inserts, specially developed for FDM 3D printed parts and post-insertion.

Content: 100 piece (€0.09* / 1 piece)

€8.99*