GraviFlex® Magnetfolie 200, selbstklebend. Zur einfacheren Applikation auf unseren Druckplatten verkaufen wir die Magnetfolien in Übergröße - nach dem Aufkleben können überstehende Reste einfach mit einem scharfen Messer entfernt werden. Verträgt kurzzeitig sogar Temperaturen von bis zu 200°C. Dauerhaft ist sie für Einsatztemperaturen von 120°C ausgelegt.
|Remanenz Br:||243–263 mT|
|Koerzitivfeldstärke HcB:||179–203 kA/m|
|Koerzitivfeldstärke HcJ:||211–257 kA/m|
|Energieprodukt (B×H)max:||11,1–13,5 kJ/m³|
|Haltekraft:||ca. 130 g/cm²|
Works like it should
It could be applied nicely on the build plate. Works very good together with the Flexible Spring Steel plate. No issues here.
The only point reducing issue I have is that is smells somehow strange if you print at higher temperatures (like 100°C for ABS). I though it was coming from the ABS+ I was using - but the same smell is coming from PETG too - so I'm making the magnetic sheet responsible for it.
But it could be something else too but I don't think that the PEI sheet makes this kind of odor.
If you are using a closed printer you are probably ok.
Good quality, works well.
External packaging suffered abuse but mag plate survived in good condition. Oversize is very appreciated when mounting it to the build plate. Shipping process required patience, especially USPS.
Very good and strong adhesion
Recommended. Oversize is a very nice touch to cut it up exactly as needed. Adhesive is strong and works very well.
Using thick (1mm) PEI on a double-sided energetic flex-plate I could only use one side as the plate warped.
Using this, I can finally print on both sides (though only barely, I need to bend it completely straight for it to work and would probably not work with a really large warp-prone print.
Still solid upgrade. This magnet is loads better than the energetic crap. And the larger size makes application a breeze.
Much stronger than Energtic 3Ds
Very strong magnet, nicely over-sized to allow trimming. A highly recommended upgrade from the one that you get with the Energtic flex plates at this size should definitely help with the larger prints pulling the steel from the bed at the edges.