|Quantity||Unit price||Reference price|
|To 6||€24.90 *||€24.90 * / 1 Unit|
|From 7||€23.90 *||€23.90 * / 1 Unit|
Prices incl. VAT plus shipping costs
In stock, ships within approx. 10 working day(s)
- Order number: RD-MGN9H-350-SIL
- Supplier: RobotDigg
- Width: 2 cm
- Height: 1 cm
- Length: 35 cm
- Weight: 0.164 kg
Miniature linear guideway; single rail (MGNR09R) cut to length with a single long block (MGN9H). Made from stainless steel.
The blocks and rails are non-interchangeable - keep the blocks on the rails! A violation does expire warranty effectively.
We strongly recommend to clean the rails before lubrication. Put a zip tie through the very last holes to ensure the block can not escape the rail. Fill a glass with some grease solvent and soak the blocks for at least an hour. Rinse the blocks and wipe the rail from any residue grease with a lint-free cloth.
We recommend to lubricate the ball races and bearing balls with grease, and cover the entire rail itself in a thin coat of grease to prevent oxidation. Recommended lubricatants (in no particular order):
- Fuchs Planto Multispray S
- Fuchs Lagermeister BF2
- Mobilux EP 1 or EP 2
- HIWIN G05
Note: lubricants containing MoS2 or graphite must not be used.
|Release:||v1.8, v2.0, v2.1, v2.2, v2.4|
|Preload:||Z1 (light preload)|
|Accuracy:||N (or better)|
Nothing to complain
Ordered 2 extra in case there would have been quality differences. After thorough cleaning and adding lithium crease I tried to compare the rails, and few were extra good but could not identify, which one were the worst.
So now I have 2 350mm rails for some other project :)
Rails are functioning perfectly! Nice end stops to avoid carriage to drop off the rail. Recommended!
The best budget choice
If you're after a budget rail that can still produce an excellent printer, then this is the best option I've found.