Top seller
50+
Hint!
50+
50+
Hint!
-30
V1.8
230
-30
V1.8
230
50+
V2.4
V1.8
No results were found for the filter!
Hint!
50+
6x3 mm Neodym magnets, round, N52, black 6x3 mm Neodym magnet, coated with black epoxy. 10 pieces per bag.
Content 10 Piece(s) (€0.29 * / 1 Piece(s))
€2.90 *
Hint!
Brass Heat Insert, M3, ø5 mm OD, 4 mm length Brass heat inserts, specially developed for FDM 3D printed parts and post-insertion. 100 pieces per bag.
Content 100 Piece(s) (€0.09 * / 1 Piece(s))
€8.90 *
NEW
Legacy
230
Cast Aluminium Plate - 230x230x6mm Mill-finished and stress-relieved cast Aluminium plate without any further machining. Edges are saw-cut. Both sides are covered with a protective film. We use these cast aluminium plates as our raw material for the beds. A perfect...
Content 1 Unit
€17.90 *
50+
V2.4
V1.8
Dragon Printhead Dragon Printhead. MJF, Nylon PA-12, matte-black. Single part, front and back are merged.
Content 1 Unit
€24.90 *
V2.4
V1.8
-10
50+
GALILEO
LDO 36STH17-1004AHG Suitable for the Galileo, Orbiter or Sherpa Mini extruder. NEW: terminated with a Molex® Micro-Fit™ 3.0 connector (or equivalent).
Content 1 Unit
€17.90 * €19.90 *
-17
50+
Afterburner
LDO 42STH20-1004AS Suitable for Afterburner and Jetpack extruder. NEW: terminated with a Molex® Micro-Fit™ 3.0 connector (or equivalent).
Content 1 Unit
€14.90 * €17.90 *
VSW
M4
LDO 42STH40-1684AC Suitable for Switchwire X axis, Y axis and Z axis. Suitable for M4 extruder.
Content 1 Unit
€14.90 *
50+
V2.4
V1.8
Legacy
-30
V1.8
230
50+
Miniature Flanged Ball Bearing, F 695 ZZ / F695... High quality sealed miniature flanged ball bearing F 695 ZZ / F695 ZZ, 5x13x4 mm.
From €1.90 *
V2.4
V1.8
Mosquito Printhead Mosquito Printhead. MJF, Nylon PA-12, matte-black. Single part, front and back are merged.
Content 1 Unit
€22.90 *
-30
V1.8
230
50+
V2.4
V1.8
SSR, DC/AC, 230V/AC 10A This solid state relay can switch load currents in the range of 24-480VAC (usually 230V) up to currents of 10A. zero cross switching galvanic isolation (opto-isolator) touch protection (IP20) switching state signaling with LED
Content 1 Unit
€12.90 *
TL-Q5MC2 Inductive Sensor Genuine OMRON TL-Q5MC2 2M NPN NC inductive sensor, suitable as Z probe, with a 5mm sensing distance. Note: does not sense alumium early enough. Requires a springsteel sheet. needs longer screws than the BOM sensor (2x M3x25 instead of...
Content 1 Unit
€49.90 *
Viewed