We run Fermio Labs with all our heart but not with all our time. Fermio Labs still is a hobby project and we all have full time jobs that pay the bills and feed the family. With the current demand even though we only sell products that are physically in stock, shipping your order can take up to 10 working days. We’re working on an improvement but want to play open book! Happy building, happy printing — your Fermio Labs team!
Top seller
V0
120
Hint!
50+
50+
50+
Hint!
50+
50+
V0.0
Hint!
V0
120
-11
50+
V0.0
120
No results were found for the filter!
Hint!
50+
6x3 mm Neodym magnets, round, N52, black 6x3 mm Neodym magnet, coated with black epoxy. 10 pieces per bag.
Content 10 Piece(s) (€0.29 * / 1 Piece(s))
€2.90 *
Hint!
V0.0
V0.1
120
Acrylic Panel Set Enclosure panel set made from laser cut acrylic (PMMA) sheets for the VORON0. All panels are 3mm thick. Contents 2pcs side panels 1pcs door panel
€24.90 *
Hint!
V0.0
120
Acrylic Top Hat Panel Set Top Hat panel set made from laser cut acrylic (PMMA) sheets for the VORON0. All panels are 3mm thick. Contents 4pcs side panels 1pcs top panel
€19.90 *
V0.0
MOD
120
Aluminium Composite Bottom Panel (Mod) Bottom panel mod for Voron0 1x bottom panel, 3mm thickness https://github.com/theFPVgeek/VoronUsers/tree/master/printer_mods/Kruppes/Closed_Bottom
€9.90 *
V0.0
MOD
120
Aluminium Composite M4 Back Panel (Mod) M4 extruder Mod for Voron0 1x back panel, 3mm thickness https://github.com/theFPVgeek/VoronUsers/tree/master/printer_mods/theFPVgeek/Voron_V0_M4_Extruder_Mount
€9.90 *
Hint!
V0.0
120
Aluminium Composite Panel Set Enclosure panel set made from CNC machined aluminium composite panel sheets for the VORON0. All panels are 3mm thick. Contents 1pcs front deck panel 1pcs rear deck panel 1pcs middle panel 1pcs back panel Note: deck panel has no holes for...
€19.90 *
Hint!
50+
Brass Heat Insert, M3, ø5 mm OD, 4 mm length Brass heat inserts, specially developed for FDM 3D printed parts and post-insertion. 100 pieces per bag.
Content 100 Piece(s) (€0.09 * / 1 Piece(s))
€8.90 *
V0
120
Build Plate 120x120x6mm CNC machined, precision milled and stress relieved cast Aluminium plate with slots to mount on the frame. The backside features two M3x0.5 threaded through holes for protective earth and a temperature fuse. Chamfered from all sides.
Content 1 Unit
€19.90 *
V0
120
Cast Aluminium Plate - 120x120x6mm Mill-finished and stress-relieved cast Aluminium plate without any further machining. Edges are saw-cut. Both sides are covered with a protective film. We use these cast aluminium plates as our raw material for the beds. A perfect...
Content 1 Unit
€7.90 *
Hint!
V0
120
CPC MR 7ML 150mm Genuine CPC miniature linear guideway; single rail (MR07M-RAIL) cut to length with a single long block (MR07M-BLOCK). The blocks feature an injection hole for lubrication and a seal from all sides (even the bottom). Warranty The blocks...
Content 1 Unit
€44.90 *
50+
Hint!
V0
120
Flexible Spring Steel Sheet Flexible springsteel sheets to be used with our magnetic sheets and our black PEI printing foil . All spring steel sheets are come with 5 mm oversize in X and Y for easier positioning (except for MK52/Switchwire & Prusa Mini).
From €4.90 *
V0.0
120
igus® energy chain, Z axis, 120mm spec VORON0 energy chain made by igus®. Matching length for Z axis for 120mm spec. Flexible ends. Fully assembled.
Content 1 Unit
€9.90 *
V2.4
V1.8
300
Keenovo Silicone Heatmat The silicone heatmats were custom designed by Fermio Labs and made to spec by Keenovo. All heaters are optimized for our build plates shapes and hole positions. They allow even heating almost all the way to the edges of the build plate....
From €69.90 *
50+
Pocketwatch
-11
50+
V0.0
120
-10
GALILEO
LDO 36STH17-1004AHG Suitable for the Galileo, Orbiter or Sherpa Mini extruder. NEW: terminated with a Molex® Micro-Fit™ 3.0 connector (or equivalent).
Content 1 Unit
€17.90 * €19.90 *
V0.1
120
50+
VSW
M4
LDO 42STH40-1684AC Suitable for Switchwire X axis, Y axis and Z axis. Suitable for M4 extruder.
Content 1 Unit
€14.90 *
50+
V0.0
Viewed