Filter
–
EOL
Sold out
%
VSW
Misumi VORON Switchwire Frame, black
Anodizing / Color: black | Voron / Model: Switchwire | Voron / Spec: 250
Misumi VORON frame kits contain all needed aluminium extrusions, machined to spec (holes and tapped ends). Note: our VORON2 V2.4 frames do not include nor need 4 pcs of 90° angled corner cubes.
€99.99* €129.99* (23.08% saved)
Sold out
Tip
V24
TRI
Voron Carbon Fiber X Gantry, 250 spec
Voron / Spec: 250
Light weight carbon fiber X gantry replacement for Voron 2 & Trident. much lighter than aluminium extrusion suits MGN12 rigid 2mm wall design includes mounting/installation hardware Please choose the appropriate length tube for your machine and/or see below for more information and technical specifications. This carbon fiber x gantry replacement was developed after testing and trialing some of the carbon fiber gantry replacement options available in market. Size 250 spec = 330 mm length 300 spec = 380 mm length 350 spec = 430 mm length Features much lighter than the aluminium counterpart Alu X CF X Weight Saved 330 mm 156 g 66 g 90 g 380 mm 180 g 78 g 102 g 430 mm 202 g 86 g 116 g drop in replacement on all existing spec Voron 2 and Voron Trident models (250 / 300 / 350) adequate mounting holes for MGN12 linear rails adequate access to all rail/top mounting screws / nuts multiple mounting points for chains and alternative toolhead wiring solutions like Roadkill toolhead pcbs using flat/ribbon style cables tested to an operating temperature of 90c What’s included carbon fibre square tube 2x 250mm length 5mm carbon rod – diameter tolerance of 4.96-4.99mm (for other weight saving projects / mods) 10x M3 flanged and serrated hex nuts (since 16th of March 2023) 10x M5 flanged and serrated hex nuts (since 16th of March 2023) M3 5.5mm hex nut driver (since 16th of March 2023) Installation Our tube uses the spec Voron mounting pattern / locations for the top and bottom M5 bolts as described in the manual assembly instructions for both Voron 2 and Voron Trident so there is no difference from standard gantry assembly. The tube is also 2020 in dimension, matching the specced aluminium extrusion and compatible with the rail centering printed parts. There are 2 changes from standard manual assembly: Printed hex nut holders are needed and inserted into the square tube to secure and align the hex nuts for the incoming M5 bolts that attach the X gantry to the XY joints. As the carbon gantry does not have slots or channels in the center of the faces, alternate XY joints are required to be printed that do not have locating notches that usually go into the slot of the aluminium extrusion. These are the stock XY joints with the locating notches removed. For further modification and weight reduction in addition to the carbon fibre gantry. The pins mod is available here from Woki Leo. https://github.com/Woki-Leo/Carbonfiber-X-Axis *WARNING* Cutting carbon fiber releases dangerous and harmful particles when cut. Please be aware and take the necessary precautions. https://www.monash.edu/ohs/info-docs/chemical-management/carbon-fibre-composites-ohs-information-sheet
€54.99*
Sold out
Tip
V24
TRI
Voron Carbon Fiber X Gantry, 300 spec €59.99*
Voron / Spec: 300
Light weight carbon fiber X gantry replacement for Voron 2 & Trident. much lighter than aluminium extrusion suits MGN12 rigid 2mm wall design includes mounting/installation hardware Please choose the appropriate length tube for your machine and/or see below for more information and technical specifications. This carbon fiber x gantry replacement was developed after testing and trialing some of the carbon fiber gantry replacement options available in market. Size 250 spec = 330 mm length 300 spec = 380 mm length 350 spec = 430 mm length Features much lighter than the aluminium counterpart Alu X CF X Weight Saved 330 mm 156 g 66 g 90 g 380 mm 180 g 78 g 102 g 430 mm 202 g 86 g 116 g drop in replacement on all existing spec Voron 2 and Voron Trident models (250 / 300 / 350) adequate mounting holes for MGN12 linear rails adequate access to all rail/top mounting screws / nuts multiple mounting points for chains and alternative toolhead wiring solutions like Roadkill toolhead pcbs using flat/ribbon style cables tested to an operating temperature of 90c What’s included carbon fibre square tube 2x 250mm length 5mm carbon rod – diameter tolerance of 4.96-4.99mm (for other weight saving projects / mods) 10x M3 flanged and serrated hex nuts (since 16th of March 2023) 10x M5 flanged and serrated hex nuts (since 16th of March 2023) M3 5.5mm hex nut driver (since 16th of March 2023) Installation Our tube uses the spec Voron mounting pattern / locations for the top and bottom M5 bolts as described in the manual assembly instructions for both Voron 2 and Voron Trident so there is no difference from standard gantry assembly. The tube is also 2020 in dimension, matching the specced aluminium extrusion and compatible with the rail centering printed parts. There are 2 changes from standard manual assembly: Printed hex nut holders are needed and inserted into the square tube to secure and align the hex nuts for the incoming M5 bolts that attach the X gantry to the XY joints. As the carbon gantry does not have slots or channels in the center of the faces, alternate XY joints are required to be printed that do not have locating notches that usually go into the slot of the aluminium extrusion. These are the stock XY joints with the locating notches removed. For further modification and weight reduction in addition to the carbon fibre gantry. The pins mod is available here from Woki Leo. https://github.com/Woki-Leo/Carbonfiber-X-Axis *WARNING* Cutting carbon fiber releases dangerous and harmful particles when cut. Please be aware and take the necessary precautions. https://www.monash.edu/ohs/info-docs/chemical-management/carbon-fibre-composites-ohs-information-sheet
Variants from €54.99*
Sold out
Tip
V24
TRI
Voron Carbon Fiber X Gantry, 350 spec €64.99*
Voron / Spec: 350
Light weight carbon fiber X gantry replacement for Voron 2 & Trident. much lighter than aluminium extrusion suits MGN12 rigid 2mm wall design includes mounting/installation hardware Please choose the appropriate length tube for your machine and/or see below for more information and technical specifications. This carbon fiber x gantry replacement was developed after testing and trialing some of the carbon fiber gantry replacement options available in market. Size 250 spec = 330 mm length 300 spec = 380 mm length 350 spec = 430 mm length Features much lighter than the aluminium counterpart Alu X CF X Weight Saved 330 mm 156 g 66 g 90 g 380 mm 180 g 78 g 102 g 430 mm 202 g 86 g 116 g drop in replacement on all existing spec Voron 2 and Voron Trident models (250 / 300 / 350) adequate mounting holes for MGN12 linear rails adequate access to all rail/top mounting screws / nuts multiple mounting points for chains and alternative toolhead wiring solutions like Roadkill toolhead pcbs using flat/ribbon style cables tested to an operating temperature of 90c What’s included carbon fibre square tube 2x 250mm length 5mm carbon rod – diameter tolerance of 4.96-4.99mm (for other weight saving projects / mods) 10x M3 flanged and serrated hex nuts (since 16th of March 2023) 10x M5 flanged and serrated hex nuts (since 16th of March 2023) M3 5.5mm hex nut driver (since 16th of March 2023) Installation Our tube uses the spec Voron mounting pattern / locations for the top and bottom M5 bolts as described in the manual assembly instructions for both Voron 2 and Voron Trident so there is no difference from standard gantry assembly. The tube is also 2020 in dimension, matching the specced aluminium extrusion and compatible with the rail centering printed parts. There are 2 changes from standard manual assembly: Printed hex nut holders are needed and inserted into the square tube to secure and align the hex nuts for the incoming M5 bolts that attach the X gantry to the XY joints. As the carbon gantry does not have slots or channels in the center of the faces, alternate XY joints are required to be printed that do not have locating notches that usually go into the slot of the aluminium extrusion. These are the stock XY joints with the locating notches removed. For further modification and weight reduction in addition to the carbon fibre gantry. The pins mod is available here from Woki Leo. https://github.com/Woki-Leo/Carbonfiber-X-Axis *WARNING* Cutting carbon fiber releases dangerous and harmful particles when cut. Please be aware and take the necessary precautions. https://www.monash.edu/ohs/info-docs/chemical-management/carbon-fibre-composites-ohs-information-sheet
Variants from €54.99*
Sold out
%
Tip
TRI
VORON Trident Frame, 250 spec, black
Anodizing / Color: black | Voron / Spec: 250
VORON Trident frame kit, custom production by ODM. All aluminium extrusions are sand-blasted and anodized after machining to provide a clean and matte look; T-slot nut width is 6 mm and compatible with our MISUMI T-slot nuts. Contents Quantity 250 spec 300 spec 350 spec 4 pcs/kit FLG-AKP-2020-500-LCP-RCP-AV360 FLG-AKP-2020-500-LCP-RCP-AV360 FLG-AKP-2020-500-LCP-RCP-AV360 9 pcs/kit FLG-AKP-2020-370-TPW FLG-AKP-2020-420-TPW FLG-AKP-2020-470-TPW 1 pcs/kit FLG-AKP-2020-370-TPW-AH185 FLG-AKP-2020-420-TPW-AH210 FLG-AKP-2020-470-TPW-AH235 1 pcs/kit FLG-AKP-2020-370-AH185 FLG-AKP-2020-420-AH210 FLG-AKP-2020-470-AH235 1 pcs/kit FLG-AKP-2020-330-LTP FLG-AKP-2020-330-LTP FLG-AKP-2020-330-LTP 1 pcs/kit FLG-AKP-2020-330 FLG-AKP-2020-380 FLG-AKP-2020-430 1 pcs/kit FLG-AKP-2020-240 FLG-AKP-2020-290 FLG-AKP-2020-340 1 pcs/kit FLG-AKP-2020-232-LTP FLG-AKP-2020-282-LTP FLG-AKP-2020-332-LTP Machining LCP-RCP: crisscross through holes 10 mm from the respective end faces TPW: both end faces tapped M5x0.8 6H x 16 mm LTP: left end faces tapped M5x0.8 6H x 16 mm AV360: vertical through holes with 360 mm distance from left end plane AH185: horizontal through holes with 185 mm distance from left end plane
€109.99* €124.99* (12% saved)
Sold out
%
Tip
TRI
VORON Trident Frame, 300 spec, black €119.99* €134.99* (11.11% saved)
Anodizing / Color: black | Voron / Spec: 300
VORON Trident frame kit, custom production by ODM. All aluminium extrusions are sand-blasted and anodized after machining to provide a clean and matte look; T-slot nut width is 6 mm and compatible with our MISUMI T-slot nuts. Contents Quantity 250 spec 300 spec 350 spec 4 pcs/kit FLG-AKP-2020-500-LCP-RCP-AV360 FLG-AKP-2020-500-LCP-RCP-AV360 FLG-AKP-2020-500-LCP-RCP-AV360 9 pcs/kit FLG-AKP-2020-370-TPW FLG-AKP-2020-420-TPW FLG-AKP-2020-470-TPW 1 pcs/kit FLG-AKP-2020-370-TPW-AH185 FLG-AKP-2020-420-TPW-AH210 FLG-AKP-2020-470-TPW-AH235 1 pcs/kit FLG-AKP-2020-370-AH185 FLG-AKP-2020-420-AH210 FLG-AKP-2020-470-AH235 1 pcs/kit FLG-AKP-2020-330-LTP FLG-AKP-2020-330-LTP FLG-AKP-2020-330-LTP 1 pcs/kit FLG-AKP-2020-330 FLG-AKP-2020-380 FLG-AKP-2020-430 1 pcs/kit FLG-AKP-2020-240 FLG-AKP-2020-290 FLG-AKP-2020-340 1 pcs/kit FLG-AKP-2020-232-LTP FLG-AKP-2020-282-LTP FLG-AKP-2020-332-LTP Machining LCP-RCP: crisscross through holes 10 mm from the respective end faces TPW: both end faces tapped M5x0.8 6H x 16 mm LTP: left end faces tapped M5x0.8 6H x 16 mm AV360: vertical through holes with 360 mm distance from left end plane AH185: horizontal through holes with 185 mm distance from left end plane
Variants from €109.99*
Sold out
%
Tip
TRI
VORON Trident Frame, 350 spec, black €129.99* €144.99* (10.35% saved)
Anodizing / Color: black | Voron / Spec: 350
VORON Trident frame kit, custom production by ODM. All aluminium extrusions are sand-blasted and anodized after machining to provide a clean and matte look; T-slot nut width is 6 mm and compatible with our MISUMI T-slot nuts. Contents Quantity 250 spec 300 spec 350 spec 4 pcs/kit FLG-AKP-2020-500-LCP-RCP-AV360 FLG-AKP-2020-500-LCP-RCP-AV360 FLG-AKP-2020-500-LCP-RCP-AV360 9 pcs/kit FLG-AKP-2020-370-TPW FLG-AKP-2020-420-TPW FLG-AKP-2020-470-TPW 1 pcs/kit FLG-AKP-2020-370-TPW-AH185 FLG-AKP-2020-420-TPW-AH210 FLG-AKP-2020-470-TPW-AH235 1 pcs/kit FLG-AKP-2020-370-AH185 FLG-AKP-2020-420-AH210 FLG-AKP-2020-470-AH235 1 pcs/kit FLG-AKP-2020-330-LTP FLG-AKP-2020-330-LTP FLG-AKP-2020-330-LTP 1 pcs/kit FLG-AKP-2020-330 FLG-AKP-2020-380 FLG-AKP-2020-430 1 pcs/kit FLG-AKP-2020-240 FLG-AKP-2020-290 FLG-AKP-2020-340 1 pcs/kit FLG-AKP-2020-232-LTP FLG-AKP-2020-282-LTP FLG-AKP-2020-332-LTP Machining LCP-RCP: crisscross through holes 10 mm from the respective end faces TPW: both end faces tapped M5x0.8 6H x 16 mm LTP: left end faces tapped M5x0.8 6H x 16 mm AV360: vertical through holes with 360 mm distance from left end plane AH185: horizontal through holes with 185 mm distance from left end plane
Variants from €109.99*
V02
V01
VORON0 T-Slot Nut, 150 mm
150 mm long t-slot nut for VORON0 for easy linear rail assembly. Features ten M2 threads, matching the mounting pattern of our MGN7 linear rails and fitting our t-slot extrusions. Replaces hex nuts and 3D printed guide. Contents 5 pieces
Content: 5 piece (€5.00* / 1 piece)
€24.99*
%
Tip
Top
V02
V01
VORON0 V0.2 Frame Kit, 120 spec, black
Anodizing / Color: black
Extrusions are a custom production by an ODM. All aluminium extrusions are sand-blasted and anodized after machining to provide a clean and matte look; every end is tapped with a M3x0.5 6H x 10 mm thread; T-slot nut width is 3 mm and compatible with our MakerBeam T-slot nuts. Frame VORON0 V0.2 frame extrusions (V0.1 backward compatible). Top Hat VORON0 V0.2 top hat extrusions (100 mm height). Kirigami Be aware that we leave out the 3 x 100 mm extrusions for the bed assembly on purpose; we provide this frame with a full Kirigami (same color) instead. Contents Quantity 120 spec 6 pcs/kit FLG-AKP-1515-200 4 pcs/kit FLG-AKP-1515-200-LCH-75-RCH-75 2 pcs/kit FLG-AKP-1515-200-LCH-75-RCP-75 4 pcs/kit FLG-AKP-1515-200-LCH-295 1 pcs/kit FLG-VRN-HAT-V02-100 1 pcs/kit FLG-VRN-V02-MOD-KIRIGAMI Machining LCH75: horizontal through holes with 7.5 mm distance from left end face LCH295: horizontal through holes with 29.5 mm distance from left end face RCH75: horizontal through holes with 7.5 mm distance from right end face RCP75: crisscross through holes with 7.5 mm distance from right end face
€89.00* €104.00* (14.42% saved)
%
Tip
V02
V01
VORON0 V0.2 Frame Kit, 120 spec, blue
Anodizing / Color: blue
Extrusions are a custom production by an ODM. All aluminium extrusions are sand-blasted and anodized after machining to provide a clean and matte look; every end is tapped with a M3x0.5 6H x 10 mm thread; T-slot nut width is 3 mm and compatible with our MakerBeam T-slot nuts. Frame VORON0 V0.2 frame extrusions (V0.1 backward compatible). Top Hat VORON0 V0.2 top hat extrusions (100 mm height). Kirigami Be aware that we leave out the 3 x 100 mm extrusions for the bed assembly on purpose; we provide this frame with a full Kirigami (same color) instead. Contents Quantity 120 spec 6 pcs/kit FLG-AKP-1515-200 4 pcs/kit FLG-AKP-1515-200-LCH-75-RCH-75 2 pcs/kit FLG-AKP-1515-200-LCH-75-RCP-75 4 pcs/kit FLG-AKP-1515-200-LCH-295 1 pcs/kit FLG-VRN-HAT-V02-100 1 pcs/kit FLG-VRN-V02-MOD-KIRIGAMI Machining LCH75: horizontal through holes with 7.5 mm distance from left end face LCH295: horizontal through holes with 29.5 mm distance from left end face RCH75: horizontal through holes with 7.5 mm distance from right end face RCP75: crisscross through holes with 7.5 mm distance from right end face
€89.00* €104.00* (14.42% saved)
%
Tip
V02
V01
VORON0 V0.2 Frame Kit, 120 spec, red
Anodizing / Color: red
Extrusions are a custom production by an ODM. All aluminium extrusions are sand-blasted and anodized after machining to provide a clean and matte look; every end is tapped with a M3x0.5 6H x 10 mm thread; T-slot nut width is 3 mm and compatible with our MakerBeam T-slot nuts. Frame VORON0 V0.2 frame extrusions (V0.1 backward compatible). Top Hat VORON0 V0.2 top hat extrusions (100 mm height). Kirigami Be aware that we leave out the 3 x 100 mm extrusions for the bed assembly on purpose; we provide this frame with a full Kirigami (same color) instead. Contents Quantity 120 spec 6 pcs/kit FLG-AKP-1515-200 4 pcs/kit FLG-AKP-1515-200-LCH-75-RCH-75 2 pcs/kit FLG-AKP-1515-200-LCH-75-RCP-75 4 pcs/kit FLG-AKP-1515-200-LCH-295 1 pcs/kit FLG-VRN-HAT-V02-100 1 pcs/kit FLG-VRN-V02-MOD-KIRIGAMI Machining LCH75: horizontal through holes with 7.5 mm distance from left end face LCH295: horizontal through holes with 29.5 mm distance from left end face RCH75: horizontal through holes with 7.5 mm distance from right end face RCP75: crisscross through holes with 7.5 mm distance from right end face
€89.00* €104.00* (14.42% saved)
%
Tip
V02
V01
VORON0 V0.2 Frame Kit, 120 spec, space gray
Anodizing / Color: space gray
Extrusions are a custom production by an ODM. All aluminium extrusions are sand-blasted and anodized after machining to provide a clean and matte look; every end is tapped with a M3x0.5 6H x 10 mm thread; T-slot nut width is 3 mm and compatible with our MakerBeam T-slot nuts. Frame VORON0 V0.2 frame extrusions (V0.1 backward compatible). Top Hat VORON0 V0.2 top hat extrusions (100 mm height). Kirigami Be aware that we leave out the 3 x 100 mm extrusions for the bed assembly on purpose; we provide this frame with a full Kirigami (same color) instead. Contents Quantity 120 spec 6 pcs/kit FLG-AKP-1515-200 4 pcs/kit FLG-AKP-1515-200-LCH-75-RCH-75 2 pcs/kit FLG-AKP-1515-200-LCH-75-RCP-75 4 pcs/kit FLG-AKP-1515-200-LCH-295 1 pcs/kit FLG-VRN-HAT-V02-100 1 pcs/kit FLG-VRN-V02-MOD-KIRIGAMI Machining LCH75: horizontal through holes with 7.5 mm distance from left end face LCH295: horizontal through holes with 29.5 mm distance from left end face RCH75: horizontal through holes with 7.5 mm distance from right end face RCP75: crisscross through holes with 7.5 mm distance from right end face
€89.00* €104.00* (14.42% saved)
Tip
New
V02
V01
VORON0 V0.2 Top Hat Extrusions Kit, 100 spec, black
Anodizing / Color: black
VORON0 V0.2 top hat extrusion kit, custom production by ODM. All aluminium extrusions are sand-blasted and anodized after machining to provide a clean and matte look; every end is tapped with a M3x0.5 6H x 10 mm thread; T-slot nut width is 3 mm and compatible with our MakerBeam T-slot nuts. Contents Quantity 100 spec 4 pcs/kit FLG-AKP-1515-200 4 pcs/kit FLG-AKP-1515-100-LCP-75 Machining LCP75: crisscross through holes with 7.5 mm distance from left end face
€29.99*
Only 6 available
Tip
New
V02
V01
VORON0 V0.2 Top Hat Extrusions Kit, 100 spec, blue
Anodizing / Color: blue
VORON0 V0.2 top hat extrusion kit, custom production by ODM. All aluminium extrusions are sand-blasted and anodized after machining to provide a clean and matte look; every end is tapped with a M3x0.5 6H x 10 mm thread; T-slot nut width is 3 mm and compatible with our MakerBeam T-slot nuts. Contents Quantity 100 spec 4 pcs/kit FLG-AKP-1515-200 4 pcs/kit FLG-AKP-1515-100-LCP-75 Machining LCP75: crisscross through holes with 7.5 mm distance from left end face
€29.99*
Only 3 available
Tip
New
V02
V01
VORON0 V0.2 Top Hat Extrusions Kit, 100 spec, red
Anodizing / Color: red
VORON0 V0.2 top hat extrusion kit, custom production by ODM. All aluminium extrusions are sand-blasted and anodized after machining to provide a clean and matte look; every end is tapped with a M3x0.5 6H x 10 mm thread; T-slot nut width is 3 mm and compatible with our MakerBeam T-slot nuts. Contents Quantity 100 spec 4 pcs/kit FLG-AKP-1515-200 4 pcs/kit FLG-AKP-1515-100-LCP-75 Machining LCP75: crisscross through holes with 7.5 mm distance from left end face
€29.99*
Tip
New
V02
V01
VORON0 V0.2 Top Hat Extrusions Kit, 100 spec, space gray
Anodizing / Color: space gray
VORON0 V0.2 top hat extrusion kit, custom production by ODM. All aluminium extrusions are sand-blasted and anodized after machining to provide a clean and matte look; every end is tapped with a M3x0.5 6H x 10 mm thread; T-slot nut width is 3 mm and compatible with our MakerBeam T-slot nuts. Contents Quantity 100 spec 4 pcs/kit FLG-AKP-1515-200 4 pcs/kit FLG-AKP-1515-100-LCP-75 Machining LCP75: crisscross through holes with 7.5 mm distance from left end face
€29.99*
Sold out
%
Tip
V24
VORON2 V2.4 Frame, 250 spec, black
Anodizing / Color: black | Voron / Spec: 250
VORON2 V2.4 frame kit, custom production by ODM. All aluminium extrusions are sand-blasted and anodized after machining to provide a clean and matte look; T-slot nut width is 6 mm and compatible with our MISUMI T-slot nuts. Note First batch includes 4 pcs of 90° corner-cubes. Contents Quantity 250 spec 300 spec 350 spec 4 pcs/kit FLG-AKP-2020-430-LCP-RCP FLG-AKP-2020-480-LCP-RCP FLG-AKP-2020-530-LCP-RCP 10 pcs/kit FLG-AKP-2020-370-TPW FLG-AKP-2020-420-TPW FLG-AKP-2020-470-TPW 2 pcs/kit FLG-AKP-2020-350 FLG-AKP-2020-400 FLG-AKP-2020-450 1 pcs/kit FLG-AKP-2020-330 FLG-AKP-2020-380 FLG-AKP-2020-430 1 pcs/kit FLG-AKP-2020-240 FLG-AKP-2020-290 FLG-AKP-2020-340 Machining LCP-RCP: crisscross through holes 10 mm from the respective end faces TPW: both end faces tapped M5x0.8 6H x 16 mm
€109.99* €124.99* (12% saved)
Sold out
%
Tip
V24
VORON2 V2.4 Frame, 300 spec, black €119.99* €134.99* (11.11% saved)
Anodizing / Color: black | Voron / Spec: 300
VORON2 V2.4 frame kit, custom production by ODM. All aluminium extrusions are sand-blasted and anodized after machining to provide a clean and matte look; T-slot nut width is 6 mm and compatible with our MISUMI T-slot nuts. Note First batch includes 4 pcs of 90° corner-cubes. Contents Quantity 250 spec 300 spec 350 spec 4 pcs/kit FLG-AKP-2020-430-LCP-RCP FLG-AKP-2020-480-LCP-RCP FLG-AKP-2020-530-LCP-RCP 10 pcs/kit FLG-AKP-2020-370-TPW FLG-AKP-2020-420-TPW FLG-AKP-2020-470-TPW 2 pcs/kit FLG-AKP-2020-350 FLG-AKP-2020-400 FLG-AKP-2020-450 1 pcs/kit FLG-AKP-2020-330 FLG-AKP-2020-380 FLG-AKP-2020-430 1 pcs/kit FLG-AKP-2020-240 FLG-AKP-2020-290 FLG-AKP-2020-340 Machining LCP-RCP: crisscross through holes 10 mm from the respective end faces TPW: both end faces tapped M5x0.8 6H x 16 mm
Variants from €109.99*
Sold out
%
Tip
V24
VORON2 V2.4 Frame, 350 spec, black €129.99* €144.99* (10.35% saved)
Anodizing / Color: black | Voron / Spec: 350
VORON2 V2.4 frame kit, custom production by ODM. All aluminium extrusions are sand-blasted and anodized after machining to provide a clean and matte look; T-slot nut width is 6 mm and compatible with our MISUMI T-slot nuts. Note First batch includes 4 pcs of 90° corner-cubes. Contents Quantity 250 spec 300 spec 350 spec 4 pcs/kit FLG-AKP-2020-430-LCP-RCP FLG-AKP-2020-480-LCP-RCP FLG-AKP-2020-530-LCP-RCP 10 pcs/kit FLG-AKP-2020-370-TPW FLG-AKP-2020-420-TPW FLG-AKP-2020-470-TPW 2 pcs/kit FLG-AKP-2020-350 FLG-AKP-2020-400 FLG-AKP-2020-450 1 pcs/kit FLG-AKP-2020-330 FLG-AKP-2020-380 FLG-AKP-2020-430 1 pcs/kit FLG-AKP-2020-240 FLG-AKP-2020-290 FLG-AKP-2020-340 Machining LCP-RCP: crisscross through holes 10 mm from the respective end faces TPW: both end faces tapped M5x0.8 6H x 16 mm
Variants from €109.99*