Extrudr DuraPro ASA CF (carbon), 1.75 mm, 0.75 kg

This solid state relay can switch load currents in the range of 24-480VAC (usually 230V) up to currents of 10A. zero cross switching galvanic isolation (opto-isolator) touch protection (IP20) switching state signaling with LED Downloads A-Senco SSR-500-1DA48-10 Datasheet

Genuine Gates PowerGrip® GT® 2 open belts. Low dust and vibration variant (RF). Contents 1 pcs. Gates PowerGrip® GT® 2 Open Belt (segments of 5 meter) Note Please be aware that we sell only segments of 5 meter length. We do not offer different lengths!

Adapter plate for mounting an SSR relay on a top-hat rail. Full metal anodized with spring claw.

Enclosure panel set made from laser cut acrylic (PMMA) sheets. All panels are 3mm thick. Contents 2pcs side panels 1pcs top panel 2pcs door panels Cleaning Note don't use isopropanol or similar! only with water or special PMMA cleaner is allowed

The new DuraPro ASA has been specially developed for industrial applications and is characterised by its high UV and weather resistance. It is therefore particularly suitable for automotive and outdoor applications. The material is fire retardant according to UL94 HB. DuraPro ASA has been optimised for the FFF/FDM process, so the material has good layer adhesion, thermal stability, improved flow properties and low warping. UV and weather resistant Matt surface High mechanical strength Good layer and bed adhesion Low Warping Print Settings Print temperature: 230°C ± 10 Bed temp: 100°C ± 10 Printing surface: textured PEI sheet Fan speed: max 20%

Fermio Labs miniature linear guideway; single rail cut to length with a single long block. Highest preload (Z1) and normal (N) precision guarantees a stiff / play-free and binding-free motion. Unlike most of the linear guideways produced in China, our blocks feature a functional injection hole / grease port for lubrication which is compatible with our lubrication kit. Warranty The blocks and rails are non-interchangeable - keep the blocks on the rails! A violation does expire warranty effectively. Cleaning We strongly recommend to clean the rails before lubrication. Put a zip tie through the very last holes to ensure the block can not escape the rail. Fill a glass with some grease solvent and soak the blocks for at least an hour. Rinse the blocks and wipe the rail from any residue grease with a lint-free cloth. Lubrication We recommend to lubricate the ball races and bearing balls with grease, and cover the entire rail itself in a thin coat of grease to prevent oxidation. Recommended lubricants (in no particular order): CPC Lubrication Kit 18G Fuchs Planto Multispray S Fuchs Lagermeister BF2 Mobilux EP 1 or EP 2 HIWIN G05 Note: lubricants containing MoS2 or graphite must not be used.