Extrudr DuraPro ASA white, 1.75 mm, 0.75 kg

Optical sensor PCB for TAP including adapter cable to our wire harness for Plug&Play (For the 5V version you need to ensure 5V, we are working on some documentation. You can also open a ticket for some help!).INFO: (Updated 5.1.23)  At the moment we deliver a 5V only version and we removed U2 from the PCB. There are some issues with the official design. Even with some intermediat solusions we see remaining risk. Warning Do not connect or disconnect the PCB when the printer is powered! Technical Data 5V supply voltage only Open drain signal output Optional 10k pull-up (against +5V) on signal output (via solder bridge) OPB971N51 sensor Contents 1x full assembled and 100% tested PCB 1x short cable (JST-PH => Molex Microfit 3.0)

They are manufactured by Bondtech in-house, and will fit the following hotends/blocks: Mosquito® / Magnum Mosquito® Liquid Mosquito® Magnum+ Copperhead™ E3D Chimera and Kraken E3D V4, V5 and V6 blocks Prusa i3, Prusa Mini RepRap M6 Features 1 unit per pack; Available sizes : 0.40, 0.50, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench Main Bondtech CHT® Advantages Higher melt capacity by increasing the surface area of the heating walls Affordable price Machined with ultra-precision Brass nozzle with Nickel coated surface Follows nozzle standards: RepRap (M6×1×7.5×12.5) MK8 (M6×1×5×13) May be used with 1.75 or 2.85mm hotends. Advantages of the Bondtech CHT® technology: Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Core Heating is a patented technology Registration number: EP3445568A1Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls. Advantages of the Nickel Coating A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

StealthBurner RGB LED Kit, pre-wired. Total of three SK6812 RGBNW LEDs. Wire terminated with 3-pin Molex Microfit 3.0 connector. Hint Use our prepared connection cable StealthBurner RGB LED Wire Harness to update your wire harness. Note The M42 hexnut and 3D printed parts are not part of this kit and are pictured for demonstration purposes only.

Das ABS-Filament von Nobufil wird aus recycelten Kunststoffen hergestellt. Dabei handelt es sich um Produktionsabfälle, die bei der industriellen Verarbeitung anfallen. Durch spezielle Modifikation neigt dieses Material im Gegensatz zu Filamenten aus herkömmlichen ABS zu deutlich weniger Warping und weist eine reduzierte Geruchsbildung auf. Dadurch ist auch eine Verarbeitung auf Druckern mit offenem Bauraum möglich. Die physikalischen Eigenschaften von Nobufil ABSx umfassen eine hohe Zugfestigkeit und Steifheit. Außerdem weist es eine gute Wärme- und Chemikalienbeständigkeit auf. Gedruckte Teile können anschließend einfach nachbearbeitet werden. Dadurch eignet sich dieses Material besonders für die Herstellung von Prototypen, Modellen und Kleinserien von technischen Teilen. Temperaturbeständigkeit bis ca. 90°C Breite Farbpalette durch geringe Eigenfarbe Einfache Verdruckbarkeit auch mit offenem Bauraum Geringe Geruchsentwicklung Hohe Detailgenauigkeit auch bei komplexen Geometrien Print Settings Print temperature: 260°C ± 10 Bed temp: 100°C ± 10 Printing surface: textured PEI sheet Fan speed: max 15%

The new DuraPro ASA has been specially developed for industrial applications and is characterised by its high UV and weather resistance. It is therefore particularly suitable for automotive and outdoor applications. The material is fire retardant according to UL94 HB. DuraPro ASA has been optimised for the FFF/FDM process, so the material has good layer adhesion, thermal stability, improved flow properties and low warping. UV and weather resistant Matt surface High mechanical strength Good layer and bed adhesion Low Warping Print Settings Print temperature: 230°C ± 10 Bed temp: 100°C ± 10 Printing surface: textured PEI sheet Fan speed: max 20%

Round neodym magnet, 6 x 3 mm, N52 (≤ 80 °C), epoxy coated black. Note Electrically non conductive.