Brass Heat Insert, 5 x 4 mm, M3
€8.99*
Content: 100 piece (€0.09* / 1 piece)
In stock, delivery time 2-5 working days
€8.99*
Brass Heat Insert, 5 x 4 mm, M3
Content: 100 piece (€0.09* / 1 piece)
Product number: FLG-BHI-54-M3
Packaging: 130 x 90 x 10 mm (0.1 kg)
Product information "Brass Heat Insert, 5 x 4 mm, M3"
Brass heat inserts, specially developed for FDM 3D printed parts and post-insertion.
| Voron / Extruder: | Afterburner, Galileo, Jetpack, M4, Pocketwatch 2, StealthBurner |
|---|---|
| Voron / Model: | Legacy, Switchwire, Trident, VORON0 V0.1, VORON1 V1.8, VORON2 V2.4 |
| Voron / Spec: | 120, 230, 250, 300, 350 |
Bill of Materials for "Brass Heat Insert, 5 x 4 mm, M3"
Our Bill Of Materials is a usefull tool while sourcing your VORON.
| Model / Spec | 120 | 230 | 250 | 300 | 350 |
|---|---|---|---|---|---|
| VORON Legacy | 1 | ||||
| VORON Switchwire | 1 | ||||
| VORON Trident | 1 | 1 | 1 | ||
| VORON0 V0.1 | 1 | ||||
| VORON1 V1.8 | 1 | 1 | |||
| VORON2 V2.4 | 1 | 1 | 1 |
Login
Customers also bought
Top
OMRON D2F-5L Microswitch
Endstop Microswitch usable for X/Y/Z. Type: D2F-5LRating: 250 V/AC - 5A
€2.99*
Top
StealthBurner RGB LED Kit
StealthBurner RGB LED Kit, pre-wired. Total of three SK6812 RGBNW LEDs. Wire terminated with 3-pin Molex Microfit 3.0 connector. Hint Use our prepared connection cable StealthBurner RGB LED Wire Harness to update your wire harness. Note The M42 hexnut and 3D printed parts are not part of this kit and are pictured for demonstration purposes only.
€5.99*
Top
Round Neodym Magnets, 6 x 3 mm, N52, coated black, electrically non conductive
Content: 10 piece (€0.30* / 1 piece)
€2.99*
Top
Solid State Relay (SSR), DC/AC, 120/230 V/AC, 10 Ampere
This solid state relay can switch load currents in the range of 24-480VAC (usually 230V) up to currents of 10A. zero cross switching galvanic isolation (opto-isolator) touch protection (IP20) switching state signaling with LED Downloads A-Senco SSR-500-1DA48-10 Datasheet
€14.99*
Top
Voron Nozzle Endstop
DIY Z Endstop PCB, requires custom printed part and soldering. Contents 1x PCB 1x 3-Pin JST-XH connector 1x Omron D2F-5L Hint Use our prepared connection cable Nozzle Endstop Wire Harness Downloads Z-Switch_FermioLabs_Rev1.stl Note: The pins of the connector and microswitch have to be cutted very flat before soldering!
€4.99*