Picture similar to product
Content: 2 piece (€8.75* / 1 piece)
In stock, delivery time 1-3 working days
Product number: FLG-VRN-PCB-DL8-COB-SM
Product information "Daylight on a Matchstick (COB)"
- chainable 24V LED bar
- on both sides a JST-XH 2 pin connector (black)
- CRI >= 90
- CTT = 4000K
- Typical Luminous Efficacy = 188lm/W
- Typical Flux @25°C
Stick XXL 2x 660lm Stick 2x 500lm Matchstick 2x 330lm
- chainable 5V RGB LED bar
- on both sides a JST-XH 3 pin connector (black)
- WS2812B LEDs
- one resistor for the dataline is inside each box, in case you need it to get right color control
- Klipper color order: GRB
|Stick XXL||370mm||for V2/TR 350|
|Stick||270mm||for V2/TR 250/300|
Based on BLAMM's Daylight Voron Hardware design.
Properties "Daylight on a Matchstick (COB)"
|Daylight / LED:||COB|
|Daylight / Size:||SM|
|Printer / Volume:||120 mm³|
|Voron / Model:||VORON0 V0.1, VORON0 V0.2|
Manufacturer "Fermio Labs GmbH"
Fermio Labs provides the Voron Design community with high quality products. The founders are deeply rooted in and connected with the community and want to make Voron 3D printers more accessible.
Related links of the manufacturer
Bill of Materials for "Daylight on a Matchstick (COB)"
Our Bill Of Materials is a usefull tool while sourcing your VORON.
|Model / Spec||120||180||230||250||300||350|
0 of 0 reviews
> 500 available
OMRON D2F-5L Microswitch
Endstop Microswitch usable for X/Y/Z. Type: D2F-5LRating: 250 V/AC - 5A
VORON0 V0.2 Top Hat Acrylic Panels
Tophat panel set made from laser cut acrylic (PMMA) sheets for the VORON0 V0.2. All panels are 3mm thick. Tophat height 100mm. Contents 4pcs side panels (212mm x 91mm) 1pcs top panel (212mm x 212mm) Cleaning Note don't use isopropanol or similar! only with water or special PMMA cleaner is allowed
CPC MR 7ML, 150 mm
Genuine CPC miniature linear guideway; single rail cut to length with a single long block. Highest preload (V1) and normal (N) precision guarantees a stiff / play-free and binding-free motion. The blocks feature an injection hole for lubrication. Warranty The blocks and rails are non-interchangeable - keep the blocks on the rails! A violation does expire warranty effectively. Cleaning We strongly recommend to clean the rails before lubrication. Put a zip tie through the very last holes to ensure the block can not escape the rail. Fill a glass with some grease solvent and soak the blocks for at least an hour. Rinse the blocks and wipe the rail from any residue grease with a lint-free cloth. Lubrication We recommend to lubricate the ball races and bearing balls with grease, and cover the entire rail itself in a thin coat of grease to prevent oxidation. Recommended lubricants (in no particular order): CPC Lubrication Kit 18G Fuchs Planto Multispray S Fuchs Lagermeister BF2 Mobilux EP 1 or EP 2 HIWIN G05 Note: lubricants containing MoS2 or graphite must not be used.
Variants from €39.99*
VORON0 V0.2 Aluminium Composite Panels, 120 Spec
Enclosure panel set made from CNC machined aluminium composite panel sheets for the VORON0.2 With our "easy-slot-cut" the deck panel easily fits into the extrusion slot without big force. All panels are 3mm thick. Contents 1pcs deck panel (no print) 1pcs middle panel 2pcs back panels (top & bottom) 1pcs motor panel1pcs bottom panel Cleaning Note don't use isopropanol or similar! only with water is allowed
> 500 available
Round Neodym Magnets, 6 x 3 mm, N35H (high temp), electrically conductive
Round neodym magnet, 6 x 3 mm, N35H (≤ 100 °C), nickel plated. Note Electrically conductive.
Content: 10 piece (€0.40* / 1 piece)
Variants from €2.99*
Gates Powergrip® 2GT Open Belt, 6 mm wide, 5 m length
Genuine Gates PowerGrip® GT® 2 open belts. Low dust and vibration variant (RF). Contents 1 pcs. Gates PowerGrip® GT® 2 Open Belt (segments of 5 meter) Note Please be aware that we sell only segments of 5 meter length. We do not offer different lengths!
Content: 5 meter (€4.00* / 1 meter)