worldwide shipping
delivery by DHL, GLS & UPS
14 days money back guarantee
SSL secured payments

Daylight on a Stick (COB)

Product information "Daylight on a Stick (COB)"

COB

  • chainable 24V LED bar
  • on both sides a JST-XH 2 pin connector
  • CRI >= 90
  • CTT = 4000K

RGB

  • chainable 5V RGB LED bar
  • on both sides a JST-XH 3 pin connector
  • WS2812B LEDs
  • one resistor for the dataline is inside each box, in case you need it to get right color control

Length

  • Stick:            270mm
  • Matchstick:  158mm

Note

Based on BLAMM's Daylight Voron Hardware design.

Manufacturer "Fermio Labs GmbH"

Fermio Labs provides the Voron Design community with high quality products. The founders are deeply rooted in and connected with the community and want to make Voron 3D printers more accessible.

Related links of the manufacturer

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


%
Top
Solid State Relay (SSR), DC/AC, 120/230 V/AC, 10 Ampere
Solid State Relay (SSR), DC/AC, 120/230 V/AC, 10 Ampere
This solid state relay can switch load currents in the range of 24-480VAC (usually 230V) up to currents of 10A. zero cross switching galvanic isolation (opto-isolator) touch protection (IP20) switching state signaling with LED Downloads A-Senco SSR-500-1DA48-10 Datasheet

€12.99* €14.99* (13.34% saved)
Top
Müller Tecfilm® Ultem® 1000, PEI sheet, 315 x 315 mm, black
Müller Tecfilm® Ultem® 1000, PEI sheet, 315 x 315 mm, black
Our black PEI sheets are backed with 3M™ 467 one-sided self-adhesive. They're made from SABIC ULTEM™ 1000 granulate and extruded by Dr. Dietrich Müller GmbH in Germany.

Variants from €7.49*
€15.99*
Top
Spring Steel Sheet, VORON, 305 x 305 mm
Spring Steel Sheet, VORON, 305 x 305 mm
Flexible springsteel sheet made from C85 alloy. Perfect to release your printed parts easily after printing. Simply bend the sheet by some degree and your printed parts pop right off your print surface. Note For improved longetivity, bend and release printed parts after letting both, the printed parts and the springsteel sheet, cool down to room temperature. Note The sheets are oiled to protect them from rust. Please clean the sheets before use! Note VORON0 (125 x 125 mm), Prusa Mini & Prusa MK52 do not have a Voron logo!

Variants from €5.99*
€14.99*
Only 2 available
Top
V24
TRI
Fermio MGN12H, 350 mm, 440C SUS (silver)
Fermio MGN12H, 350 mm, 440C SUS (silver)
Fermio Labs miniature linear guideway; single rail cut to length with a single long block. Highest preload (Z1) and normal (N) precision guarantees a stiff / play-free and binding-free motion. Unlike most of the linear guideways produced in China, our blocks feature a functional injection hole / grease port for lubrication which is compatible with our lubrication kit. Warranty The blocks and rails are non-interchangeable - keep the blocks on the rails! A violation does expire warranty effectively. Cleaning We strongly recommend to clean the rails before lubrication. Put a zip tie through the very last holes to ensure the block can not escape the rail. Fill a glass with some grease solvent and soak the blocks for at least an hour. Rinse the blocks and wipe the rail from any residue grease with a lint-free cloth. Lubrication We recommend to lubricate the ball races and bearing balls with grease, and cover the entire rail itself in a thin coat of grease to prevent oxidation. Recommended lubricants (in no particular order): CPC Lubrication Kit 18G Fuchs Planto Multispray S Fuchs Lagermeister BF2 Mobilux EP 1 or EP 2 HIWIN G05 Note: lubricants containing MoS2 or graphite must not be used.

Variants from €12.99*
€31.99*