Daylight on a Stick XXL (COB)
Picture similar to product
€22.99*
Content: 2 piece (€11.50* / 1 piece)
In stock, delivery time 1-3 working days
Product number: FLG-VRN-PCB-DL8-COB-XXL
Product information "Daylight on a Stick XXL (COB) "
COB
- chainable 24V LED bar
- on both sides a JST-XH 2 pin connector (black)
- CRI >= 90
- CTT = 4000K
- Typical Luminous Efficacy = 188lm/W
- Typical Flux @25°C
Stick XXL 2x 660lm Stick 2x 500lm Matchstick 2x 330lm
RGB
- chainable 5V RGB LED bar
- on both sides a JST-XH 3 pin connector (black)
- WS2812B LEDs
- one resistor for the dataline is inside each box, in case you need it to get right color control
- Klipper color order: GRB
Length
| Stick XXL | 370mm | for V2/TR 350 |
| Stick | 270mm | for V2/TR 250/300 |
| Matchstick | 158mm | for V0.1/V0.2 |
Note
Based on BLAMM's Daylight Voron Hardware design.
Properties "Daylight on a Stick XXL (COB) "
| Daylight / LED: | COB |
|---|---|
| Daylight / Size: | XXL |
| Printer / Volume: | 350 mm³ |
| Voltage: | 24 V/DC |
| Voron / Model: | Trident, VORON2 V2.4 |
Manufacturer "Fermio Labs GmbH"
Fermio Labs provides the Voron Design community with high quality products. The founders are deeply rooted in and connected with the community and want to make Voron 3D printers more accessible.
Related links of the manufacturer
Bill of Materials for "Daylight on a Stick XXL (COB) "
Our Bill Of Materials is a usefull tool while sourcing your VORON.
| Model / Spec | 120 | 180 | 230 | 250 | 300 | 350 |
|---|---|---|---|---|---|---|
| Annex K3 | ||||||
| VORON Legacy | ||||||
| VORON Switchwire | ||||||
| VORON Trident | 1 | |||||
| VORON0 V0.1 | ||||||
| VORON0 V0.2 | ||||||
| VORON1 V1.8 | ||||||
| VORON2 V2.4 | 1 |
Login
Customers also bought
Top
ALL
StealthBurner RGB LED Kit
StealthBurner RGB LED Kit, pre-wired. Total of three SK6812 RGBNW LEDs. Wire terminated with 3-pin Molex Microfit 3.0 connector. Hint Use our prepared connection cable StealthBurner RGB LED Wire Harness to update your wire harness. Note The M42 hexnut and 3D printed parts are not part of this kit and are pictured for demonstration purposes only.
€5.99*
Top
ALL
Brass Heat Insert, 5 x 4 mm, M3
Brass heat inserts, specially developed for FDM 3D printed parts and post-insertion.
Content: 100 piece (€0.09* / 1 piece)
€8.99*
Only 6 available
Tip
Top
V24
TRI
Keenovo Silicone Heatmat, 340 x 340 mm, 230 V/AC, 500 W €84.99*
The silicone heatmats were custom designed by Fermio Labs and made to spec by Keenovo. All heaters are optimized for our build plates shapes and hole positions. They allow even heating almost all the way to the edges of the build plate. The power is adjusted to allow running them at 100 % power without risking damage to the build plate instead of the 50% to 80% PWM limit recommended for the heaters listed on the BOM. The standard DIN466 thumb nuts used in all Voron printers used as spacers (VORON2) or levelling nuts (Trident, VORON0 and VORON1) can be used as guides to align the heater. For added safety all heaters come with a self resetting bi-metal 150C thermostat. This turns off the heater if temperatures reaches 150 C due to technical failure of your electronics (only meant as a safety feature, not for temperature regulation). Thermistor used is a NTC 100K thermistor (Beta 25/50 3950K-1%, click here for the R-T datasheet) Choose type 11 or 13 in Marlin firmware. Use "Generic 3950" in Klipper. SKU/Model Compatibility Dimensions Voltage Watt Ampere Thermostat FLG-VRN-KNV-110 VORON0 110 x 110 mm 24 V/DC 60 W 2.5 A 150° C FLG-VRN-KNV-240 250 Trident, VORON1, VORON2 240 x 240 mm 230 V/AC 300 W 1.3 A 150° C FLG-VRN-KNV-290 300 Trident, VORON1, VORON2 290 x 290 mm 230 V/AC 400 W 1.7 A 150° C FLG-VRN-KNV-340 350 Trident, VORON2 340 x 340 mm 230 V/AC 500 W 2.1 A 150° C
Variants from €24.99*
> 500 available
Top
ALL
Round Neodym Magnets, 6 x 3 mm, N35H (high temp), electrically conductive €3.99*
Round neodym magnet, 6 x 3 mm, N35H (≤ 100 °C), nickel plated. Note Electrically conductive.
Content: 10 piece (€0.40* / 1 piece)
Variants from €2.99*
Tip
Top
V24
TRI
VORON Build Plate, 350 x 350 mm €74.99*
CNC machined, precision milled and stress relieved cast aluminium plate with four slots (V2.4) and three counterbores (V1.8, Trident) to mount. The underside features two M3x0.5 threaded through holes for protective earth and temperature fuse. Chamfered from all sides. With our customized Keenovo Heatmat you get the best combination for your printer.
Variants from €24.99*
Top
ALL
SSR DIN Rail Mounting Adapter
Adapter plate for mounting an SSR relay on a top-hat rail. Full metal anodized with spring claw.
€3.99*