Picture similar to product
In stock, delivery time 2-5 working days
Product number: FLG-MBB-F623-ZZ
Product information "F 623 ZZ / F623 ZZ, 3 x 10 x 4 mm, Miniature Flanged Ball Bearing"
Miniature ball bearings are deep groove ball bearings in small. Their dimensions make them suitable for special applications. In addition, they allow very high speeds with low noise.
Properties "F 623 ZZ / F623 ZZ, 3 x 10 x 4 mm, Miniature Flanged Ball Bearing"
|Voron / Model:||VORON0 V0.1, VORON0 V0.2|
|Voron / Spec:||120|
Manufacturer "Fermio Labs GmbH"
Fermio Labs provides the Voron Design community with high quality products. The founders are deeply rooted in and connected with the community and want to make Voron 3D printers more accessible.
Related links of the manufacturer
Bill of Materials for "F 623 ZZ / F623 ZZ, 3 x 10 x 4 mm, Miniature Flanged Ball Bearing"
Our Bill Of Materials is a usefull tool while sourcing your VORON.
|Model / Spec||120||180||230||250||300||350|
0 of 0 reviews
Gates Powergrip® 2GT Open Belt, 6 mm wide, 5 m length
Genuine Gates PowerGrip® GT® 2 open belts. Low dust and vibration variant (RF). Contents 1 pcs. Gates PowerGrip® GT® 2 Open Belt (segments of 5 meter) Note Please be aware that we sell only segments of 5 meter length. We do not offer different lengths!
Content: 5 meter (€4.00* / 1 meter)
MakerBeam M3 T-Slot Nut
The MakerBeamXL T-slot nut is made of stainless steel and was specially designed to slide into the T-slot grooves of the MakerBeamXL profile. The T-slot nut is great to fasten brackets or corner cubes. These T-slot nuts are also compatible with OpenBeam. Both MakerBeamXL and OpenBeam are 15mmx15mm in diameter.
Fermio MGN7H, 150 mm, 440C SUS (silver)
Fermio Labs miniature linear guideway; single rail cut to length with a single long block. Highest preload (Z1) and normal (N) precision guarantees a stiff / play-free and binding-free motion. Unlike most of the linear guideways produced in China, our blocks feature a functional injection hole / grease port for lubrication which is compatible with our lubrication kit. Warranty The blocks and rails are non-interchangeable - keep the blocks on the rails! A violation does expire warranty effectively. Cleaning We strongly recommend to clean the rails before lubrication. Put a zip tie through the very last holes to ensure the block can not escape the rail. Fill a glass with some grease solvent and soak the blocks for at least an hour. Rinse the blocks and wipe the rail from any residue grease with a lint-free cloth. Lubrication We recommend to lubricate the ball races and bearing balls with grease, and cover the entire rail itself in a thin coat of grease to prevent oxidation. Recommended lubricants (in no particular order): CPC Lubrication Kit 18G Fuchs Planto Multispray S Fuchs Lagermeister BF2 Mobilux EP 1 or EP 2 HIWIN G05 Note: lubricants containing MoS2 or graphite must not be used.
Variants from €12.99*
Gates Powergrip® 2GT Pulley, 20 tooth, 6 mm wide, 5 mm bore, natural
Contents 1 pcs. Gates PowerGrip® GT® 2 Pulley 2 pcs. M3/M4 Grub Screw (depends)
Schallenkammer® GraviFlex® Magnetic Sheet 200, 125 x 125 mm
GraviFlex® magnetic foil 200, self-adhesive anisotropic multi-polarly magnetized operating temperature 120°C (up to 200°C temporary) Product characteristics Material thickness: 1 mm Remanence Br: 243 – 263 mT Coercivity HcB: 179 – 203 kA/m Coercivity HcJ: 211 – 257 kA/m Energy product (B × H)max.: 11,1 – 13,5 kJ/m³ Holding force: approx. 130 g/cm²
igus® e-chain® E04.07, 15 chain links, open
Genuine igus® e-chain® energy chain, series E04.07.015.0. Inner radius of 15mm. Fixed ends. Fully assembled. Opens.