worldwide shipping
delivery by DHL, GLS & UPS
14 days money back guarantee
SSL secured payments

Fermio MGN9H, 50 mm, 440C SUS (silver)

Product information "Fermio MGN9H, 50 mm, 440C SUS (silver)"

Fermio Labs miniature linear guideway; single rail cut to length with a single long block. Highest preload (Z1) and normal (N) precision guarantees a stiff / play-free and binding-free motion. Unlike most of the linear guideways produced in China, our blocks feature a functional injection hole / grease port for lubrication which is compatible with our lubrication kit.

Warranty

The blocks and rails are non-interchangeable - keep the blocks on the rails! A violation does expire warranty effectively.

Cleaning

We strongly recommend to clean the rails before lubrication. Put a zip tie through the very last holes to ensure the block can not escape the rail. Fill a glass with some grease solvent and soak the blocks for at least an hour. Rinse the blocks and wipe the rail from any residue grease with a lint-free cloth.

Lubrication

We recommend to lubricate the ball races and bearing balls with grease, and cover the entire rail itself in a thin coat of grease to prevent oxidation. Recommended lubricants (in no particular order):

Note: lubricants containing MoS2 or graphite must not be used.

Properties "Fermio MGN9H, 50 mm, 440C SUS (silver)"
Voron / Model: Switchwire, Trident, VORON1 V1.8, VORON2 V2.4
Manufacturer "Fermio Labs GmbH"

Fermio Labs provides the Voron Design community with high quality products. The founders are deeply rooted in and connected with the community and want to make Voron 3D printers more accessible.

Related links of the manufacturer

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


GCr15 / Bearing Steel

GCr15 is a very well known and worlwide used bearing steel. For the looks and to improve resistance to rust, we oxidise them black!

440C SUS / Stainless Steel

440C is most famous as one of the best and most versatile cutlery steel. Its very hard, resistant to rust, is good for polishing and in general an overachiever in its area.

Cleaning

Our rails come preserved with oil so they are protected against the elements while waiting for being installed in a new printer. This oil needs to be removed before usage, it's not feasible as lubricant!

Lubrication

We recommend to lubricate the ball races and bearing balls with grease, and cover the entire rail itself in a thin coat of grease to prevent oxidation.

Preload

Preload determines the stiffness of your linear guide. The higher the preload, the stiffer. Free running rails can wobble which will result in noise and vibrations and visible defects in your overall print quality (i.e. layer stacking). Our rails are specced with the highest preload level available - reducing noise and vibrations and improving your print quality!

Tip
Top
V24
TRI
VSW
Fermio OptoTap PCB (5 Volt)
Fermio OptoTap PCB (5 Volt)
Optical sensor PCB for TAP including adapter cable to our wire harness for Plug&Play, but you need to ensure 5V supply for this board. The design includes a supply polarity protection. INFO: New version! Warning Do not connect or disconnect the PCB when the printer is powered! Technical Data 5V supply voltage only Open drain signal output Optional 10k pull-up (against +5V) on signal output (via solder bridge) OPB973N51 sensor (signal level is inverted!) Contents 1x full assembled and 100% tested PCB 1x short cable (JST-PH => Molex Microfit 3.0)

€14.99*
> 500 available
Top
ALL
Round Neodym Magnets, 6 x 3 mm, N52, coated black, electrically non conductive
Round Neodym Magnets, 6 x 3 mm, N52, coated black, electrically non conductive
Round neodym magnet, 6 x 3 mm, N52 (≤ 80 °C), epoxy coated black. Note Electrically non conductive.

Content: 10 piece (€0.30* / 1 piece)

€2.99*
> 500 available
Top
ALL
Round Neodym Magnets, 6 x 3 mm, N35H (high temp), electrically conductive
Round Neodym Magnets, 6 x 3 mm, N35H (high temp), electrically conductive
Round neodym magnet, 6 x 3 mm, N35H (≤ 100 °C), nickel plated. Note Electrically conductive.

Content: 10 piece (€0.40* / 1 piece)

Variants from €2.99*
€3.99*
Top
ALL
StealthBurner RGB LED Kit
StealthBurner RGB LED Kit
StealthBurner RGB LED Kit, pre-wired. Total of three SK6812 RGBNW LEDs. Wire terminated with 3-pin Molex Microfit 3.0 connector. Hint Use our prepared connection cable StealthBurner RGB LED Wire Harness to update your wire harness. Note The M42 hexnut and 3D printed parts are not part of this kit and are pictured for demonstration purposes only.

€5.99*
Top
ALL
Brass Heat Insert, 5 x 4 mm, M3
Brass Heat Insert, 5 x 4 mm, M3
Brass heat inserts, specially developed for FDM 3D printed parts and post-insertion.

Content: 100 piece (€0.09* / 1 piece)

€8.99*
Sold out
Tip
Top
V24
TRI
VSW
Fermio OptoTap PCB (12/24 Volt)
Fermio OptoTap PCB (12/24 Volt)
Optical sensor PCB for TAP including adapter cable to our wire harness for Plug&Play The design includes a supply polarity and overshoot protection.Technical Data 12V or 24V supply Open drain signal output Optional 10k pull-up (against internal +5V) on signal output (via solder bridge) OPB971N51 sensor Contents 1x full assembled and 100% tested PCB 1x short cable (JST-PH => Molex Microfit 3.0)

€17.99*