worldwide shipping
delivery by DHL, GLS & UPS
14 days money back guarantee
SSL secured payments

OptoTap PCB (V2.1+, 5 Volt only!)

Product information "OptoTap PCB (V2.1+, 5 Volt only!)"

Optical sensor PCB for TAP including adapter cable to our wire harness for Plug&Play (For the 5V version you need to ensure 5V, we are working on some documentation. You can also open a ticket for some help!).

INFO: (Updated 5.1.23)  At the moment we deliver a 5V only version. There are some issues with the official design. Even with some intermediat solusions we see remaining risk.

Warning

Do not connect or disconnect the PCB when the printer is powered!

Technical Data

  • 5V supply voltage only
  • Open drain signal output
  • Optional 10k pull-up (against +5V) on signal output (via solder bridge)
  • OPB971N51 sensor

Contents

  • 1x full assembled and 100% tested PCB
  • 1x short cable (JST-PH => Molex Microfit 3.0)
Properties "OptoTap PCB (V2.1+, 5 Volt only!)"
Voltage: 5 V/DC
Voron / Model: Switchwire, Trident, VORON2 V2.4
Voron / Spec: 250, 300, 350
Manufacturer "Fermio Labs GmbH"

Fermio Labs provides the Voron Design community with high quality products. The founders are deeply rooted in and connected with the community and want to make Voron 3D printers more accessible.

Related links of the manufacturer
Bill of Materials for "OptoTap PCB (V2.1+, 5 Volt only!)"
Our Bill Of Materials is a usefull tool while sourcing your VORON.
Model / Spec120230250300350
VORON Legacy
VORON Switchwire 1
VORON Trident 1 1 1
VORON0 V0.1
VORON0 V0.2
VORON1 V1.8
VORON2 V2.4 1 1 1

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Top
Fermio MGN9H, 50 mm, 440C SUS (silver)
Fermio MGN9H, 50 mm, 440C SUS (silver)
Fermio Labs miniature linear guideway; single rail cut to length with a single long block. Highest preload (Z1) and normal (N) precision guarantees a stiff / play-free and binding-free motion. Unlike most of the linear guideways produced in China, our blocks feature a functional injection hole / grease port for lubrication which is compatible with our lubrication kit. Warranty The blocks and rails are non-interchangeable - keep the blocks on the rails! A violation does expire warranty effectively. Cleaning We strongly recommend to clean the rails before lubrication. Put a zip tie through the very last holes to ensure the block can not escape the rail. Fill a glass with some grease solvent and soak the blocks for at least an hour. Rinse the blocks and wipe the rail from any residue grease with a lint-free cloth. Lubrication We recommend to lubricate the ball races and bearing balls with grease, and cover the entire rail itself in a thin coat of grease to prevent oxidation. Recommended lubricants (in no particular order): CPC Lubrication Kit 18G Fuchs Planto Multispray S Fuchs Lagermeister BF2 Mobilux EP 1 or EP 2 HIWIN G05 Note: lubricants containing MoS2 or graphite must not be used.

Variants from €12.99*
€14.99*
> 500 available
Top
ALL
Round Neodym Magnets, 6 x 3 mm, N52, coated black, electrically non conductive
Round Neodym Magnets, 6 x 3 mm, N52, coated black, electrically non conductive
Round neodym magnet, 6 x 3 mm, N52 (≤ 80 °C), epoxy coated black. Note Electrically non conductive.

Content: 10 piece (€0.30* / 1 piece)

€2.99*
> 500 available
Top
ALL
Round Neodym Magnets, 6 x 3 mm, N35H (high temp), electrically conductive
Round Neodym Magnets, 6 x 3 mm, N35H (high temp), electrically conductive
Round neodym magnet, 6 x 3 mm, N35H (≤ 100 °C), nickel plated. Note Electrically conductive.

Content: 10 piece (€0.40* / 1 piece)

Variants from €2.99*
€3.99*
Top
ALL
Brass Heat Insert, 5 x 4 mm, M3
Brass Heat Insert, 5 x 4 mm, M3
Brass heat inserts, specially developed for FDM 3D printed parts and post-insertion.

Content: 100 piece (€0.09* / 1 piece)

€8.99*
Top
ALL
StealthBurner RGB LED Kit
StealthBurner RGB LED Kit
StealthBurner RGB LED Kit, pre-wired. Total of three SK6812 RGBNW LEDs. Wire terminated with 3-pin Molex Microfit 3.0 connector. Hint Use our prepared connection cable StealthBurner RGB LED Wire Harness to update your wire harness. Note The M42 hexnut and 3D printed parts are not part of this kit and are pictured for demonstration purposes only.

€5.99*
Only 5 available
Top
ALL
Müller Tecfilm® Ultem® 1000, PEI sheet, 315 x 315 mm, black
Müller Tecfilm® Ultem® 1000, PEI sheet, 315 x 315 mm, black
Our black PEI sheets are backed with 3M™ 467 one-sided self-adhesive. They're made from SABIC ULTEM™ 1000 granulate and extruded by Dr. Dietrich Müller GmbH in Germany.

Variants from €7.49*
€15.99*