Voron Nozzle Endstop
Picture similar to product
€4.99*
Content: 1 piece
In stock, delivery time 2-5 working days
Product number: FLG-VRN-PCB-ZNZL
Product information "Voron Nozzle Endstop"
DIY Z Endstop PCB, requires custom printed part and soldering.
Contents
- 1x PCB
- 1x 3-Pin JST-XH connector
- 1x Omron D2F-5L
Hint
- Use our prepared connection cable Nozzle Endstop Wire Harness
Downloads
Note
Pins of the connector and microswitch have to be cutted very flat before soldering!
Properties "Voron Nozzle Endstop"
| Voron / Model: | Trident, VORON1 V1.8, VORON2 V2.4 |
|---|---|
| Voron / Spec: | 250, 300, 350 |
Manufacturer "Fermio Labs GmbH"
Fermio Labs provides the Voron Design community with high quality products. The founders are deeply rooted in and connected with the community and want to make Voron 3D printers more accessible.
Related links of the manufacturer
Bill of Materials for "Voron Nozzle Endstop"
Our Bill Of Materials is a usefull tool while sourcing your VORON.
| Model / Spec | 120 | 230 | 250 | 300 | 350 |
|---|---|---|---|---|---|
| VORON Legacy | |||||
| VORON Switchwire | |||||
| VORON Trident | 1 | 1 | 1 | ||
| VORON0 V0.1 | |||||
| VORON0 V0.2 | |||||
| VORON1 V1.8 | 1 | 1 | |||
| VORON2 V2.4 | 1 | 1 | 1 |
Login
November 15, 2021 17:54
Easy install
Comes with linked .sla file. Does need a little soldiering but with using printed part as guide it makes for easy soldering.
Top
V24
TRI
Voron X/Y Microswitch Endstop
DIY X/Y Microswitch Endstop PCB. This PCB is compatible with our Wire Harness! Soldering and printed part required. Contents 1x PCB 1x 4-Pin black JST-XH compatible connector Note: you need two Omron D2F-5L or similar microswitches! Download Microswitch_Edge_Pod.stl
€2.99*
> 500 available
Top
ALL
OMRON D2F-5L Microswitch
Endstop Microswitch usable for X/Y/Z. Type: D2F-5LRating: 250 V/AC - 5A
€2.99*
Top
ALL
Voron Nozzle Endstop Wire Harness
Wire harness for our Nozzle Endstop with 100cm of black Helukabel Heluflon®-fep-6y 0.25mm² and on both ends you have a already crimped 3-pin JST-XH connector.
€4.99*
Tip
Top
V24
TRI
Voron X/Y Hall Effect Endstop
X/Y Hall Effect endstop for contactless end position triggering. The endstop is plug&play for our Wire Harness! Contents 1x Hall Effect Endstop, ready and 100% tested 2x 6x3mm black N52 magnets NoteYou need a different print part from the release ([a]_endstop_pod_hall_effect.stl)
€14.99*
Top
ALL
StealthBurner RGB LED Kit
StealthBurner RGB LED Kit, pre-wired. Total of three SK6812 RGBNW LEDs. Wire terminated with 3-pin Molex Microfit 3.0 connector. Hint Use our prepared connection cable StealthBurner RGB LED Wire Harness to update your wire harness. Note The M42 hexnut and 3D printed parts are not part of this kit and are pictured for demonstration purposes only.
€5.99*