VORON Switchwire Aluminium Composite Panels, 250 Spec
Picture similar to product
Product number: FLG-VRN-DBND-VSW-250-NO
Product information "VORON Switchwire Aluminium Composite Panels, 250 Spec"
Enclosure panel set made from CNC machined aluminium composite panel sheets for the VORON Switchwire.
All panels are 3mm thick.
Contents
- 2pcs side rear panels
- 1pcs top rear panel
- 1pcs back panel
- 2pcs deck panel
- 1pcs bottom panel
Properties "VORON Switchwire Aluminium Composite Panels, 250 Spec"
| Panel / Aluminium Composite / Logo: | No Logo, Parts Logo (Switchwire), Voron Design, Voron Hexagon, Voron Switchwire |
|---|---|
| Panel / Thickness: | 3.0 mm (+/- 0.2 mm) |
| Voron / Model: | Switchwire |
| Voron / Spec: | 250 |
Manufacturer "Fermio Labs GmbH"
Fermio Labs provides the Voron Design community with high quality products. The founders are deeply rooted in and connected with the community and want to make Voron 3D printers more accessible.
Related links of the manufacturer
Bill of Materials for "VORON Switchwire Aluminium Composite Panels, 250 Spec"
Our Bill Of Materials is a usefull tool while sourcing your VORON.
| Model / Spec | 120 | 180 | 230 | 250 | 300 | 350 |
|---|---|---|---|---|---|---|
| Annex K3 | ||||||
| VORON Legacy | ||||||
| VORON Switchwire | 1 | |||||
| VORON Trident | ||||||
| VORON0 V0.1 | ||||||
| VORON0 V0.2 | ||||||
| VORON1 V1.8 | ||||||
| VORON2 V2.4 |
Login
Top
VSW
VORON Switchwire Acrylic Panels €49.99*
Enclosure panel set made from laser cut acrylic (PMMA) sheets. All panels are 3mm thick. Contents 2pcs side panels 1pcs top panel 2pcs door panels Cleaning Note don't use isopropanol or similar! only with water or special PMMA cleaner is allowed
Variants from €22.49*
Top
ALL
Brass Heat Insert, 5 x 4 mm, M3
Brass heat inserts, specially developed for FDM 3D printed parts and post-insertion.
Content: 100 piece (€0.09* / 1 piece)
€8.99*
Top
ALL
StealthBurner RGB LED Kit
StealthBurner RGB LED Kit, pre-wired. Total of three SK6812 RGBNW LEDs. Wire terminated with 3-pin Molex Microfit 3.0 connector. Hint Use our prepared connection cable StealthBurner RGB LED Wire Harness to update your wire harness. Note The M42 hexnut and 3D printed parts are not part of this kit and are pictured for demonstration purposes only.
€5.99*
> 500 available
Top
ALL
F 695 ZZ / F695 ZZ, 5 x 13 x 4 mm, Miniature Flanged Ball Bearing From €1.99*
Miniature ball bearings are deep groove ball bearings in small. Their dimensions make them suitable for special applications. In addition, they allow very high speeds with low noise.
Variants from €0.99*