VORON Trident Aluminium Composite Panels, 300 Spec, Parts Logo

CNC machined, precision milled and stress relieved cast aluminium plate with four slots (V2.4) and three counterbores (V1.8, Trident) to mount. The underside features two M3x0.5 threaded through for protective earth and temperature fuse. Chamfered from all sides. With our customized Keenovo Heatmat you get the best combination for your printer.

The silicone heatmats were custom designed by Fermio Labs and made to spec by Keenovo. All heaters are optimized for our build plates shapes and hole positions. They allow even heating almost all the way to the edges of the build plate. The power is adjusted to allow running them at 100 % power without risking damage to the build plate instead of the 50% to 80% PWM limit recommended for the heaters listed on the BOM. The standard DIN466 thumb nuts used in all Voron printers used as spacers (VORON2) or levelling nuts (Trident, VORON0 and VORON1) can be used as guides to align the heater. For added safety all heaters come with a self resetting bi-metal 150C thermostat. This turns off the heater if temperatures reaches 150 C due to technical failure of your electronics (only meant as a safety feature, not for temperature regulation). Thermistor used is a NTC 100K thermistor (Beta 25/50 3950K-1%, click here for the R-T datasheet) Choose type 11 or 13 in Marlin firmware. Use "Generic 3950" in Klipper. SKU/Model Compatibility Dimensions Voltage Watt Ampere Thermostat FLG-VRN-KNV-110 VORON0 110 x 110 mm 24 V/DC 60 W 2.5 A 150° C FLG-VRN-KNV-240 Trident, VORON1, VORON2 240 x 240 mm 230 V/AC 300 W 1.3 A 150° C FLG-VRN-KNV-290 Trident, VORON1, VORON2 290 x 290 mm 230 V/AC 400 W 1.7 A 150° C FLG-VRN-KNV-340 Trident, VORON2 340 x 340 mm 230 V/AC 500 W 2.1 A 150° C

DIN rail TS35x7.5. Cut to length burr-free, made from sendzimir galvanized steel. Hole pattern is 25x5.2mm and matches deck panel and aluminium extrusion distances so they can be mounted below the printer.

Wire harness addition for our StealthBurner RGB LED Kit using black Helukabel Heluflon®-fep-6y 0.25mm². One end with a Molex MicroFix 3.0 connector, the other end with a Dupont connector fitting for BTT Octopus and Fysetc Spider.

Note #1: the wire harness is compatible with VORON Trident and VORON1 V1.8, but marketed as VORON2 V2.4 wire harness. Note #2: For the BTT Octopus you can use the SKR wire harness. All required JST-XH connectors are included to do the minor modifications. See our adjustment guide for a conversion. Note #3: The LED wires for StealthBurner are not included and have to be bought separately. Are you still crimping or already printing? If you hate bad crimps and realizing how bad your eye sight really is, we have a solution! We're happy to announce that we're the first source worldwide ever for a ready made drop in wire harness using only the highest quality components available: Drop in ready wire harness for VORON2 V2.4 using 2x BTT SKR 1.3/1.4 or 1x FYSETC Spider MCUs (one JST connector change required for SKR 1.3) Wire harness 100% made in Germany by a well known wire harness manufacturer. All wires are black Helukabel Heluflon®-fep-6y 0.5mm² for the hotend heater and 0.25 mm² for everything else. Some even call these wires the mother of all cables! Only geniune JST and Molex connectors, crimped with professional dies on semi automatic industrial machines. To keep it black, without distracting white labels, all connectors are directly printed with the function. Black is the new orange! Black/red color coding on both ends for all V+ and V- wires. SKR-Variant: BAT85 Diode already included into the probe signal wire. A and B motor connectors for most common motors with detatchable wires and JST-PH 6 pin connectors X/Y-Endstop prepared for 4 pin JST-XH connector. We recommend our compatible Hall Endstop board or the Microswitch PCB, both with JST-XH connector. All wires at the X carriage terminated with Molex Microfit 3.0 connectors (yes, they fit below the stock cable cover) Sufficient wire length for proper wire management under the skirt.