VORON0 V0.1 Acrylic Panels, Voron Logo

€29.99*

Content: 1 panel kit

In stock, delivery time 2-5 working days

Voron / Model
Voron / Spec
Panel / Acrylic / Logo
Product number: FLG-VRN-PMMA-V01-120-L1
Packaging: 300 x 220 x 35 mm (1 kg)
Product information "VORON0 V0.1 Acrylic Panels, Voron Logo"

Enclosure panel set made from laser cut acrylic (PMMA) sheets.

All panels are 3mm thick.

Contents

  • 2pcs side panels
  • 1pcs door panels (with printed logo)
Voron / Model: VORON0 V0.1
Voron / Spec: 120
Bill of Materials for "VORON0 V0.1 Acrylic Panels, Voron Logo"
Our Bill Of Materials is a usefull tool while sourcing your VORON.
Model / Spec 120 230 250 300 350
VORON Legacy
VORON Switchwire
VORON Trident
VORON0 V0.1 1
VORON1 V1.8
VORON2 V2.4

1 of 1 reviews

5 out of 5 stars


100%

0%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


October 17, 2021 08:47

Good quality, cut to spec

These PMMA panels are petty goods. Sizes are precise. Side are polished with no sharp edge (at least no sharp enough to hurt yourself). Angles are rounded with a 2.5 mm radius. And a word about the packaging: it's really good. Each panel still has is protection layer on both side. Pieces of thin foam are used to protect and separate de panels. All enclose on a sandwich of cardboard.

Customers also bought

V24
TRI
Voron X/Y Microswitch Endstop
DIY X/Y Microswitch Endstop PCB. This PCB is compatible with our Wire Harness! Soldering and printed part required. Contents 1x PCB 1x 4-Pin black JST-XH compatible connector Note: you need two Omron D2F-5L or similar microswitches! Download Microswitch_Edge_Pod.stl

€2.99*
V01
Fermio MGN7H, 150 mm, GCr15 (black)
Fermio Labs miniature linear guideway; single rail cut to length with a single long block. Highest preload (Z1) and normal (N) precision guarantees a stiff / play-free and binding-free motion. Unlike most of the linear guideways produced in China, our blocks feature a functional injection hole / grease port for lubrication which is compatible with our lubrication kit. Info: MGN12 for Voron2.4 is just a MOD option for X. You will need different print parts! Warranty The blocks and rails are non-interchangeable - keep the blocks on the rails! A violation does expire warranty effectively. Cleaning We strongly recommend to clean the rails before lubrication. Put a zip tie through the very last holes to ensure the block can not escape the rail. Fill a glass with some grease solvent and soak the blocks for at least an hour. Rinse the blocks and wipe the rail from any residue grease with a lint-free cloth. Lubrication We recommend to lubricate the ball races and bearing balls with grease, and cover the entire rail itself in a thin coat of grease to prevent oxidation. Recommended lubricants (in no particular order): CPC Lubrication Kit 18G Fuchs Planto Multispray S Fuchs Lagermeister BF2 Mobilux EP 1 or EP 2 HIWIN G05 Note: lubricants containing MoS2 or graphite must not be used.

€12.99*