VORON0 V0.2 Aluminium Composite Panels, 120 Spec

Tophat panel set made from laser cut acrylic (PMMA) sheets for the VORON0 V0.2. All panels are 3mm thick. Tophat height 100mm. Contents 4pcs side panels (212mm x 91mm) 1pcs top panel (212mm x 212mm) Cleaning Note don't use isopropanol or similar! only with water or special PMMA cleaner is allowed

Enclosure panel set made from laser cut acrylic (PMMA) sheets. All panels are 3mm thick. Contents 2pcs side panels 1pcs door panels

The silicone heatmats were custom designed by Fermio Labs and made to spec by Keenovo. All heaters are optimized for our build plates shapes and hole positions. They allow even heating almost all the way to the edges of the build plate. The power is adjusted to allow running them at 100 % power without risking damage to the build plate instead of the 50% to 80% PWM limit recommended for the heaters listed on the BOM. The standard DIN466 thumb nuts used in all Voron printers used as spacers (VORON2) or levelling nuts (Trident, VORON0 and VORON1) can be used as guides to align the heater. For added safety all heaters come with a self resetting bi-metal 150C thermostat. This turns off the heater if temperatures reaches 150 C due to technical failure of your electronics (only meant as a safety feature, not for temperature regulation). Thermistor used is a NTC 100K thermistor (Beta 25/50 3950K-1%, click here for the R-T datasheet) Choose type 11 or 13 in Marlin firmware. Use "Generic 3950" in Klipper. SKU/Model Compatibility Dimensions Voltage Watt Ampere Thermostat FLG-VRN-KNV-110 VORON0 110 x 110 mm 24 V/DC 60 W 2.5 A 150° C FLG-VRN-KNV-240 250 Trident, VORON1, VORON2 240 x 240 mm 230 V/AC 300 W 1.3 A 150° C FLG-VRN-KNV-290 300 Trident, VORON1, VORON2 290 x 290 mm 230 V/AC 400 W 1.7 A 150° C FLG-VRN-KNV-340 350 Trident, VORON2 340 x 340 mm 230 V/AC 500 W 2.1 A 150° C

The MakerBeamXL T-slot nut is made of stainless steel and was specially designed to slide into the T-slot grooves of the MakerBeamXL profile. The T-slot nut is great to fasten brackets or corner cubes. These T-slot nuts are also compatible with OpenBeam. Both MakerBeamXL and OpenBeam are 15mmx15mm in diameter.

Number of poles: 2 + PEContinuous current: 10AFuse holder: 6.3APin temperature: 70°CRated voltage: 250V ACWith rocker switch and fuse holderCombination consists of appliance plug, 2-pole rocker switch and fuse holder for fuse link(5x20mm)Connection by flat cable plug 4.8mmSnap-in assemblyNote:  fuse is not included

Extrusions are a custom production by an ODM. All aluminium extrusions are sand-blasted and anodized after machining to provide a clean and matte look; every end is tapped with a M3x0.5 6H x 10 mm thread; T-slot nut width is 3 mm and compatible with our MakerBeam T-slot nuts. Frame VORON0 V0.2 frame extrusions (V0.1 backward compatible). Top Hat VORON0 V0.2 top hat extrusions (100 mm height). Kirigami Be aware that we leave out the 3 x 100 mm extrusions for the bed assembly on purpose; we provide this frame with a full Kirigami (same color) instead.  Contents Quantity 120 spec 6 pcs/kit FLG-AKP-1515-200 4 pcs/kit FLG-AKP-1515-200-LCH-75-RCH-75 2 pcs/kit FLG-AKP-1515-200-LCH-75-RCP-75 4 pcs/kit FLG-AKP-1515-200-LCH-295 1 pcs/kit FLG-VRN-HAT-V02-100 1 pcs/kit FLG-VRN-V02-MOD-KIRIGAMI Machining LCH75: horizontal through holes with 7.5 mm distance from left end face LCH295: horizontal through holes with 29.5 mm distance from left end face RCH75: horizontal through holes with 7.5 mm distance from right end face RCP75: crisscross through holes with 7.5 mm distance from right end face