Fiberlogy ABS green, 1.75 mm, 0.85 kg

Fermio Labs miniature linear guideway; single rail cut to length with a single long block. Highest preload (Z1) and normal (N) precision guarantees a stiff / play-free and binding-free motion. Unlike most of the linear guideways produced in China, our blocks feature a functional injection hole / grease port for lubrication which is compatible with our lubrication kit. Warranty The blocks and rails are non-interchangeable - keep the blocks on the rails! A violation does expire warranty effectively. Cleaning We strongly recommend to clean the rails before lubrication. Put a zip tie through the very last holes to ensure the block can not escape the rail. Fill a glass with some grease solvent and soak the blocks for at least an hour. Rinse the blocks and wipe the rail from any residue grease with a lint-free cloth. Lubrication We recommend to lubricate the ball races and bearing balls with grease, and cover the entire rail itself in a thin coat of grease to prevent oxidation. Recommended lubricants (in no particular order): CPC Lubrication Kit 18G Fuchs Planto Multispray S Fuchs Lagermeister BF2 Mobilux EP 1 or EP 2 HIWIN G05 Note: lubricants containing MoS2 or graphite must not be used.

ABS is a real expert in durability. Prints made using this filament are characterized by their hardness and high impact resistance. They are also resistant to high temperatures and abrasion. These properties extend the possibilities of ABS application. The advantages of ABS will certainly be appreciated by designers and engineers. The prints can be used to create concept models for new products or even their final versions. ABS can also be used in production, especially in prototyping more rigid elements. Application PROTOTYPES: linking elements, elements which require high temperature resistance TOOLS OR THEIR ELEMENTS: gears, racks, elements which require high durability GADGETS OR THEIR PARTS: phone cases, stands, keychains TOYS: bricks, robots or their parts, car elements HOUSE EQUIPMENT: hangers, flower pots, vases Properties high hardness high impact resistance resistance to high temperatures and abrasion can be processed mechanically and chemically Print Settings Print temperature: 255°C ± 10 Bed temp: 100°C ± 10 Printing surface: textured PEI sheet Fan speed: max 10%

Replacement Shaft assembly for our Bondtech Mini Geared (BMG), SingleDirect and DualDirect extruders. It includes the set screw for primary 1.75/5.0 drive gear.Note: New improved revision from Bondtech, where the gear wheel is in white now! For more information see link