igus® igubal® Spherical bearing, EGLM-05

Quantity Unit price
To 9
€3.99*
To 99
€3.49*
From 100
€2.99*

In stock, delivery time 2-5 working days

igus® igubal® Spherical bearing, EGLM-05
Content: 1 piece
Product number: IGS-EGLM-05
Packaging: 20 x 20 x 10 mm (0.01 kg)
Product information "igus® igubal® Spherical bearing, EGLM-05"

Direct replacement for GE5C spherical bearings.

igubal® spherical bearings

The use of spherical bearings is usually associated with high weight bearing materials, difficult installation, and high costs. Most of the time, maintenance is still necessary over the long-term, and the bearings are only corrosion-resistant in special designs. Often roller bearings or plain bearings malfunction prematurely due to high edge loads, or because they need to be elaborately readjusted, reamed, or refitted in order to compensate for alignment errors. igubal® spherical bearings put an end to all of these disadvantages and open up many new possibilities for your engineering design: they are easy to handle, cost-effective, lightweight and robust.

The housing is made from igumid G, an extremely impact-resistant, long-fibre-reinforced polymer. Suitable for temperatures from -30 °C to +80 °C in long-term use.

In standard spherical bearings, the spherical ball is made from iglidur® W300 material, which is known for lowest coefficients of friction in dry operation and extremely low tendency to stick-slip. This is especially important for low loads and very slow movements.

  • Compensation of misalignment and edge loads
  • Corrosion-resistant
  • High vibration-dampening
  • Excellent vibration dampening
  • Suitable for rotating, oscillating and axial movements

Tolerances

Maintenance-free igubal® spherical bearings have a tolerance in the inner diameter of E10. The shaft tolerance should be between h6 and h9. The bearing clearance allows for expansion of the bearings due to increasing temperatures.

Assembly

igubal® spherical bearings are press-fitted into a recommended H7 housing bore and axially secured. Exact alignment of the bearing housing is not necessary since the spherical bearing automatically compensates for alignment errors.

Voron / Model: Trident
Voron / Spec: 250, 300, 350
Bill of Materials for "igus® igubal® Spherical bearing, EGLM-05"
Our Bill Of Materials is a usefull tool while sourcing your VORON.
Model / Spec120230250300350
VORON Legacy
VORON Switchwire
VORON Trident 3 3 3
VORON0 V0.1
VORON1 V1.8
VORON2 V2.4

0 of 0 reviews

Write a review

Share your experiences with other customers.


Customers also bought

Top
OMRON D2F-5L Microswitch
OMRON D2F-5L Microswitch
Endstop Microswitch usable for X/Y/Z. Type: D2F-5LRating: 250 V/AC - 5A

€2.99*
Top
StealthBurner RGB LED Kit
StealthBurner RGB LED Kit
StealthBurner RGB LED Kit, pre-wired. Total of three SK6812 RGBNW LEDs. Wire terminated with 3-pin Molex Microfit 3.0 connector. Hint Use our prepared connection cable StealthBurner RGB LED Wire Harness to update your wire harness. Note The M42 hexnut and 3D printed parts are not part of this kit and are pictured for demonstration purposes only.

€5.99*
Top
Brass Heat Insert, 5 x 4 mm, M3
Brass Heat Insert, 5 x 4 mm, M3
Brass heat inserts, specially developed for FDM 3D printed parts and post-insertion.

Content: 100 piece (€0.09* / 1 piece)

€8.99*
Top
SSR DIN Rail Mounting Adapter
SSR DIN Rail Mounting Adapter
Adapter plate for mounting our SSR to our DIN rails.

€4.99*
Top
Round Neodym Magnets, 6 x 3 mm, N52, coated black, electrically non conductive
Round Neodym Magnets, 6 x 3 mm, N52, coated black, electrically non conductive

Content: 10 piece (€0.30* / 1 piece)

€2.99*
Top
Solid State Relay (SSR), DC/AC, 120/230 V/AC, 10 Ampere
Solid State Relay (SSR), DC/AC, 120/230 V/AC, 10 Ampere
This solid state relay can switch load currents in the range of 24-480VAC (usually 230V) up to currents of 10A. zero cross switching galvanic isolation (opto-isolator) touch protection (IP20) switching state signaling with LED Downloads A-Senco SSR-500-1DA48-10 Datasheet

€14.99*