IWISS 3220M Crimping Tool

StealthBurner RGB LED Kit, pre-wired. Total of three SK6812 RGBNW LEDs. Wire terminated with 3-pin Molex Microfit 3.0 connector. Hint Use our prepared connection cable StealthBurner RGB LED Wire Harness to update your wire harness. Note The M42 hexnut and 3D printed parts are not part of this kit and are pictured for demonstration purposes only.

Optical sensor PCB for TAP including adapter cable to our wire harness for Plug&Play, but you need to ensure 5V supply for this board. The design includes a supply polarity protection. INFO: New version! Warning Do not connect or disconnect the PCB when the printer is powered! Technical Data 5V supply voltage only Open drain signal output Optional 10k pull-up (against +5V) on signal output (via solder bridge) OPB973N51 sensor (signal level is inverted!) Contents 1x full assembled and 100% tested PCB 1x short cable (JST-PH => Molex Microfit 3.0)

COB chainable 24V LED baron both sides a JST-XH 2 pin connector (black)CRI >= 90 CTT = 4000KTypical Luminous Efficacy = 188lm/WTypical Flux @25°CStick XXL2x 660lmStick2x 500lmMatchstick2x 330lmRGB chainable 5V RGB LED baron both sides a JST-XH 3 pin connector (black)WS2812B LEDsone resistor for the dataline is inside each box, in case you need it to get right color controlKlipper color order: GRB Length Stick XXL370mmfor V2/TR 350Stick270mmfor V2/TR 250/300Matchstick158mmfor V0.1/V0.2 Note Based on BLAMM's Daylight Voron Hardware design.

Adapter plate for mounting an SSR relay on a top-hat rail. Full metal anodized with spring claw.

The HS-2D multi-function stripping tools are specially designed and precisely machined teeth grabs, holds, pulls and removes outer jacket in a simple one-handed motion. Also a wire crimping tool(crimper) which crimps insulated and non-insulated automotive ignition terminals and includes a wire cutter saving you time and money purchasing individual tools. MINIMAL EFFORT: The ratcheting action requires a fraction of hand strength. This is a must-have for professional & DIY electricians’ tool sets. SELF-ADJUSTING: The automatic mechanism strips wires from 10-24 AWG (0.5mm-6.0mm²). MULTI USE: This multi-purpose plier crimps 10-22 AWG insulated & non-insulated terminals and 7-8mm ignition terminals with an adjustable stopper. VERSATILE AND USEFUL: This handy tool should be part of any tool kit with its ability to crimp and strip copper and aluminum of a wide variety of sizes. RELIABLE & EFFICIENT: This high quality Gee Gadgets wire stripper is built tough to be durable and very long lasting. Specifications Easy stripping without any adjustment. Multifunction, made of steel by special hardened, with long lifetime. For Stripping wire from AWG24-10 (0.2 -6.0mm²). Cutting wire from AWG24-10 (0.2 -6.0mm²). Crimping insulated terminal from AWG22-10 (0.6 -6.0mm²).