Company vacation: our warehouse will be closed between October 3 and 9, 2022. Shipping and pickups will resume again from October 10, 2022.

worldwide shipping
delivery by DHL, GLS & UPS
14 days money back guarantee
SSL secured payments

Power Inlet, IEC 60320

Product information "Power Inlet, IEC 60320"
  • Number of poles: 2 + PE
  • Continuous current: 10A
  • Fuse holder: 6.3A
  • Pin temperature: 70°C
  • Rated voltage: 250V AC
  • With rocker switch and fuse holder
  • Combination consists of appliance plug, 2-pole rocker switch and fuse holder for fuse link(5x20mm)
  • Connection by flat cable plug 4.8mm
  • Snap-in assembly
Manufacturer "K+B"
Related links of the manufacturer
Bill of Materials for "Power Inlet, IEC 60320"
Our Bill Of Materials is a usefull tool while sourcing your VORON.
Model / Spec120230250300350
VORON Legacy 1
VORON Switchwire 1
VORON Trident 1 1 1
VORON0 V0.1 1
VORON1 V1.8 1 1
VORON2 V2.4 1 1 1

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


New
V01
ESKA 5 x 20 mm Microfuse, 3 A
ESKA 5 x 20 mm Microfuse, 3 A
Microfuse / Ampere: 3 A
Standard: UL 248-14(M) Medium time-lagCylindrical, 5 x 20 mm125 V / 250 V Voltage10.000A @ 125V / 200A @ 250V Breaking capacity

€0.99*
New
ESKA 5 x 20 mm Microfuse, 5 A
ESKA 5 x 20 mm Microfuse, 5 A
Microfuse / Ampere: 5 A
Standard: UL 248-14(M) Medium time-lagCylindrical, 5 x 20 mm125 V / 250 V Voltage10.000A @ 125V / 200A @ 250V Breaking capacity

€0.99*
New
Power Inlet, IEC 60320
Power Inlet, IEC 60320
Number of poles: 2 + PEContinuous current: 10AFuse holder: 6.3APin temperature: 70°CRated voltage: 250V ACWith rocker switch and fuse holderCombination consists of appliance plug, 2-pole rocker switch and fuse holder for fuse link(5x20mm)Connection by flat cable plug 4.8mmSnap-in assembly

€5.99*
> 500 available
New
Top
WAGO 221-412 Splicing Connector, max. 4 mm², 2-conductor
WAGO 221-412 Splicing Connector, max. 4 mm², 2-conductor
Terminal / Connection points: 2 | Terminal / Fine-stranded conductor: 0.14 … 4 mm² / 24 … 12 AWG
Ease of use – pull the lever up, insert a conductor and push the lever back down Available as 2-, 3- and 5-wire connectors Easily terminate conductors from 0.14 to 4 mm² Connect solid, stranded and fine-stranded conductors Save time for installers and device manufacturers Quickly install devices with higher power consumption Safely install long cable runs with larger conductor cross sections Mounting carrier for installation conforms to standards Custom carriers are possible

€0.49*
New
Top
WAGO 221-413 Splicing Connector, max. 4 mm², 3-conductor
WAGO 221-413 Splicing Connector, max. 4 mm², 3-conductor
Terminal / Connection points: 3 | Terminal / Fine-stranded conductor: 0.14 … 4 mm² / 24 … 12 AWG
Ease of use – pull the lever up, insert a conductor and push the lever back down Available as 2-, 3- and 5-wire connectors Easily terminate conductors from 0.14 to 4 mm² Connect solid, stranded and fine-stranded conductors Save time for installers and device manufacturers Quickly install devices with higher power consumption Safely install long cable runs with larger conductor cross sections Mounting carrier for installation conforms to standards Custom carriers are possible

Variants from €0.49*
€0.59*
New
WAGO 221-415 Splicing Connector, max. 4 mm², 5-conductor
WAGO 221-415 Splicing Connector, max. 4 mm², 5-conductor
Terminal / Connection points: 5 | Terminal / Fine-stranded conductor: 0.14 … 4 mm² / 24 … 12 AWG
Ease of use – pull the lever up, insert a conductor and push the lever back down Available as 2-, 3- and 5-wire connectors Easily terminate conductors from 0.14 to 4 mm² Connect solid, stranded and fine-stranded conductors Save time for installers and device manufacturers Quickly install devices with higher power consumption Safely install long cable runs with larger conductor cross sections Mounting carrier for installation conforms to standards Custom carriers are possible

Variants from €0.49*
€0.99*
New
WAGO 221-500 Mounting Carrier, 4mm², DIN-35 Rail
> 500 available
Top
OMRON D2F-5L Microswitch
OMRON D2F-5L Microswitch
Endstop Microswitch usable for X/Y/Z. Type: D2F-5LRating: 250 V/AC - 5A

€2.99*
%
Top
SSR DIN Rail Mounting Adapter
SSR DIN Rail Mounting Adapter
Adapter plate for mounting our SSR to our DIN rails.

€3.99* €4.99* (20.04% saved)
%
Top
Solid State Relay (SSR), DC/AC, 120/230 V/AC, 10 Ampere
Solid State Relay (SSR), DC/AC, 120/230 V/AC, 10 Ampere
This solid state relay can switch load currents in the range of 24-480VAC (usually 230V) up to currents of 10A. zero cross switching galvanic isolation (opto-isolator) touch protection (IP20) switching state signaling with LED Downloads A-Senco SSR-500-1DA48-10 Datasheet

€12.99* €14.99* (13.34% saved)
Tip
Top
VORON Build Plate, 300 x 300 mm
VORON Build Plate, 300 x 300 mm
CNC machined, precision milled and stress relieved cast aluminium plate with four slots (V2.4) and three counterbores (V1.8, Trident) to mount. The underside features two M3x0.5 threaded through for protective earth and temperature fuse. Chamfered from all sides. With our customized Keenovo Heatmat you get the best combination for your printer.

Variants from €24.99*
€59.99*
Tip
Top
V24
TRI
Keenovo Silicone Heatmat, 340 x 340 mm, 230 V/AC, 500 W
Keenovo Silicone Heatmat, 340 x 340 mm, 230 V/AC, 500 W
The silicone heatmats were custom designed by Fermio Labs and made to spec by Keenovo. All heaters are optimized for our build plates shapes and hole positions. They allow even heating almost all the way to the edges of the build plate. The power is adjusted to allow running them at 100 % power without risking damage to the build plate instead of the 50% to 80% PWM limit recommended for the heaters listed on the BOM. The standard DIN466 thumb nuts used in all Voron printers used as spacers (VORON2) or levelling nuts (Trident, VORON0 and VORON1) can be used as guides to align the heater. For added safety all heaters come with a self resetting bi-metal 150C thermostat. This turns off the heater if temperatures reaches 150 C due to technical failure of your electronics (only meant as a safety feature, not for temperature regulation). Thermistor used is a NTC 100K thermistor (Beta 25/50 3950K-1%, click here for the R-T datasheet) Choose type 11 or 13 in Marlin firmware. Use "Generic 3950" in Klipper. SKU/Model Compatibility Dimensions Voltage Watt Ampere Thermostat FLG-VRN-KNV-110 VORON0 110 x 110 mm 24 V/DC 60 W 2.5 A 150° C FLG-VRN-KNV-240 250 Trident, VORON1, VORON2 240 x 240 mm 230 V/AC 300 W 1.3 A 150° C FLG-VRN-KNV-290 300 Trident, VORON1, VORON2 290 x 290 mm 230 V/AC 400 W 1.7 A 150° C FLG-VRN-KNV-340 350 Trident, VORON2 340 x 340 mm 230 V/AC 500 W 2.1 A 150° C

Variants from €24.99*
€84.99*
Top
Spring Steel Sheet, VORON, 305 x 305 mm
Spring Steel Sheet, VORON, 305 x 305 mm
Flexible springsteel sheet made from C85 alloy. Perfect to release your printed parts easily after printing. Simply bend the sheet by some degree and your printed parts pop right off your print surface. Note For improved longetivity, bend and release printed parts after letting both, the printed parts and the springsteel sheet, cool down to room temperature. Note The sheets are oiled to protect them from rust. Please clean the sheets before use! Note VORON0 (125 x 125 mm), Prusa Mini & Prusa MK52 do not have a Voron logo!

Variants from €5.99*
€14.99*