Voron Tap Printed Parts
Picture similar to product
Product number: LRGR-TAP
Product information "Voron Tap Printed Parts"
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch.
Note
You are buying 3D printed parts only. Any additional hardware shown is for demonstration purposes only.
Content
- 1x MGN9_Assembly_Tool
- 1x Printed_Cut_Guide
- 1x Tap_Front_r2
- 1x Tap_Magnet_Left_r2
- 1x Tap_Magnet_Right_r2
- 1x Tap_Upper_PCB_r2
- 1x Tap_Center_r6
Manufacturer "layer.guru"
Years of building printers and printing, focused in on one thing: delivering highest quality 3D printed parts. Fast. Flawless!
Related links of the manufacturer
Bill of Materials for "Voron Tap Printed Parts"
Our Bill Of Materials is a usefull tool while sourcing your VORON.
| Model / Spec | 120 | 180 | 230 | 250 | 300 | 350 |
|---|---|---|---|---|---|---|
| Annex K3 | ||||||
| VORON Legacy | ||||||
| VORON Switchwire | ||||||
| VORON Trident | 1 | 1 | 1 | |||
| VORON0 V0.1 | ||||||
| VORON0 V0.2 | ||||||
| VORON1 V1.8 | ||||||
| VORON2 V2.4 | 1 | 1 | 1 |
Login
Klicky
> 500 available
Top
ALL
OMRON D2F-5L Microswitch
Endstop Microswitch usable for X/Y/Z. Type: D2F-5LRating: 250 V/AC - 5A
€2.99*
> 500 available
Top
ALL
Round Neodym Magnets, 6 x 3 mm, N35H (high temp), electrically conductive €3.99*
Magnet: N35H, silver, uncoated, electrically conductive
Round neodym magnet, 6 x 3 mm, N35H (≤ 100 °C), nickel plated. Note Electrically conductive.
Content: 10 piece (€0.40* / 1 piece)
Variants from €2.99*
Customers also bought
Top
Fermio MGN9H, 50 mm, 440C SUS (silver) €14.99*
Fermio Labs miniature linear guideway; single rail cut to length with a single long block. Highest preload (Z1) and normal (N) precision guarantees a stiff / play-free and binding-free motion. Unlike most of the linear guideways produced in China, our blocks feature a functional injection hole / grease port for lubrication which is compatible with our lubrication kit. Warranty The blocks and rails are non-interchangeable - keep the blocks on the rails! A violation does expire warranty effectively. Cleaning We strongly recommend to clean the rails before lubrication. Put a zip tie through the very last holes to ensure the block can not escape the rail. Fill a glass with some grease solvent and soak the blocks for at least an hour. Rinse the blocks and wipe the rail from any residue grease with a lint-free cloth. Lubrication We recommend to lubricate the ball races and bearing balls with grease, and cover the entire rail itself in a thin coat of grease to prevent oxidation. Recommended lubricants (in no particular order): CPC Lubrication Kit 18G Fuchs Planto Multispray S Fuchs Lagermeister BF2 Mobilux EP 1 or EP 2 HIWIN G05 Note: lubricants containing MoS2 or graphite must not be used.
Variants from €12.99*
Tip
Top
V24
TRI
VSW
Fermio OptoTap PCB (5 Volt)
Optical sensor PCB for TAP including adapter cable to our wire harness for Plug&Play, but you need to ensure 5V supply for this board. The design includes a supply polarity protection. INFO: New version! Warning Do not connect or disconnect the PCB when the printer is powered! Technical Data 5V supply voltage only Open drain signal output Optional 10k pull-up (against +5V) on signal output (via solder bridge) OPB973N51 sensor (signal level is inverted!) Contents 1x full assembled and 100% tested PCB 1x short cable (JST-PH => Molex Microfit 3.0)
€14.99*
Top
ALL
Round Neodym Magnets, 6 x 3 mm, N52, coated black, electrically non conductive
Round neodym magnet, 6 x 3 mm, N52 (≤ 80 °C), epoxy coated black. Note Electrically non conductive.
Content: 10 piece (€0.30* / 1 piece)
€2.99*
> 500 available
Top
ALL
Round Neodym Magnets, 6 x 3 mm, N35H (high temp), electrically conductive €3.99*
Round neodym magnet, 6 x 3 mm, N35H (≤ 100 °C), nickel plated. Note Electrically conductive.
Content: 10 piece (€0.40* / 1 piece)
Variants from €2.99*
Top
ALL
StealthBurner RGB LED Wire Harness, 350 Spec €12.49*
Wire harness addition for our StealthBurner RGB LED Kit using black Helukabel Heluflon®-fep-6y 0.25mm². One end with a Molex MicroFix 3.0 connector, the other end with a Dupont connector fitting for BTT Octopus and Fysetc Spider.
Variants from €10.49*
Top
ALL
StealthBurner RGB LED Kit
StealthBurner RGB LED Kit, pre-wired. Total of three SK6812 RGBNW LEDs. Wire terminated with 3-pin Molex Microfit 3.0 connector. Hint Use our prepared connection cable StealthBurner RGB LED Wire Harness to update your wire harness. Note The M42 hexnut and 3D printed parts are not part of this kit and are pictured for demonstration purposes only.
€5.99*