MEAN WELL LRS-150-24, 150 W, 24 V, 6 A Power Supply

Number of poles: 2 + PEContinuous current: 10AFuse holder: 6.3APin temperature: 70°CRated voltage: 250V ACWith rocker switch and fuse holderCombination consists of appliance plug, 2-pole rocker switch and fuse holder for fuse link(5x20mm)Connection by flat cable plug 4.8mmSnap-in assemblyNote:  fuse is not included

Enclosure panel set made from CNC machined aluminium composite panel sheets for the VORON0.2 With our "easy-slot-cut" the deck panel easily fits into the extrusion slot without big force. All panels are 3mm thick. Contents 1pcs deck panel (no print) 1pcs middle panel 2pcs back panels (top & bottom) 1pcs motor panel1pcs bottom panel Cleaning Note don't use isopropanol or similar! only with water is allowed

The silicone heatmats were custom designed by Fermio Labs and made to spec by Keenovo. All heaters are optimized for our build plates shapes and hole positions. They allow even heating almost all the way to the edges of the build plate. The power is adjusted to allow running them at 100 % power without risking damage to the build plate instead of the 50% to 80% PWM limit recommended for the heaters listed on the BOM. The standard DIN466 thumb nuts used in all Voron printers used as spacers (VORON2) or levelling nuts (Trident, VORON0 and VORON1) can be used as guides to align the heater. For added safety all heaters come with a self resetting bi-metal 150C thermostat. This turns off the heater if temperatures reaches 150 C due to technical failure of your electronics (only meant as a safety feature, not for temperature regulation). Thermistor used is a NTC 100K thermistor (Beta 25/50 3950K-1%, click here for the R-T datasheet) Choose type 11 or 13 in Marlin firmware. Use "Generic 3950" in Klipper. SKU/Model Compatibility Dimensions Voltage Watt Ampere Thermostat FLG-VRN-KNV-110 VORON0 110 x 110 mm 24 V/DC 60 W 2.5 A 150° C FLG-VRN-KNV-240 250 Trident, VORON1, VORON2 240 x 240 mm 230 V/AC 300 W 1.3 A 150° C FLG-VRN-KNV-290 300 Trident, VORON1, VORON2 290 x 290 mm 230 V/AC 400 W 1.7 A 150° C FLG-VRN-KNV-340 350 Trident, VORON2 340 x 340 mm 230 V/AC 500 W 2.1 A 150° C

Tophat panel set made from laser cut acrylic (PMMA) sheets for the VORON0 V0.2. All panels are 3mm thick. Tophat height 100mm. Contents 4pcs side panels (212mm x 91mm) 1pcs top panel (212mm x 212mm) Cleaning Note don't use isopropanol or similar! only with water or special PMMA cleaner is allowed

Endstop Microswitch usable for X/Y/Z. Type: D2F-5LRating: 250 V/AC - 5A

Flexible springsteel sheet made from C85 alloy. Perfect to release your printed parts easily after printing. Simply bend the sheet by some degree and your printed parts pop right off your print surface. Note For improved longetivity, bend and release printed parts after letting both, the printed parts and the springsteel sheet, cool down to room temperature. Note The sheets are oiled to protect them from rust. Please clean the sheets before use! Note VORON0 (125 x 125 mm), Prusa Mini & Prusa MK52 do not have a Voron logo!