Misumi T-Slot Nut HNTAJ6-3, 8 mm Slot, M3 Thread

Quantity Unit price
To 99
€0.59*
From 100
€0.49*

In stock, delivery time 2-5 working days

T-Slot Nut / Slot Width
T-Slot Nut / Thread Size
Product number: MSM-HNTAJ6-3
Packaging: 10 x 8 x 41 mm (0.005 kg)
Product information "Misumi T-Slot Nut HNTAJ6-3, 8 mm Slot, M3 Thread"
T-Slot Nut / Slot Width: 8 mm
T-Slot Nut / Thread Size: M3
Voron / Model: Switchwire
Voron / Spec: 250
Bill of Materials for "Misumi T-Slot Nut HNTAJ6-3, 8 mm Slot, M3 Thread"
Our Bill Of Materials is a usefull tool while sourcing your VORON.
Model / Spec 120 230 250 300 350
VORON Legacy
VORON Switchwire 12
VORON Trident
VORON0 V0.1
VORON1 V1.8
VORON2 V2.4

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Customers also bought

OMRON D2F-5L Microswitch
Endstop Microswitch usable for X/Y/Z. Type: D2F-5LRating: 250 V/AC - 5A

€2.99*
Brass Heat Insert, 5 x 4 mm, M3
Brass heat inserts, specially developed for FDM 3D printed parts and post-insertion.

Content: 100 piece (€0.09* / 1 piece)

€8.99*
New
StealthBurner RGB LED Kit
StealthBurner RGB LED Kit, pre-wired. Total of three SK6812 RGBNW LEDs. Wire terminated with 3-pin Molex Microfit 3.0 connector. Hint Use our prepared connection cable StealthBurner RGB LED Wire Harness to update your wire harness. Note The M42 hexnut and 3D printed parts are not part of this kit and are pictured for demonstration purposes only.

€5.99*
V24
TRI
SW
Fermio MGN12H, 300 mm, GCr15 (black)
Fermio Labs miniature linear guideway; single rail cut to length with a single long block. Highest preload (Z1) and normal (N) precision guarantees a stiff / play-free and binding-free motion. Unlike most of the linear guideways produced in China, our blocks feature a functional injection hole / grease port for lubrication which is compatible with our lubrication kit. Info: MGN12 for Voron2.4 is just a MOD option for X. You will need different print parts! Warranty The blocks and rails are non-interchangeable - keep the blocks on the rails! A violation does expire warranty effectively. Cleaning We strongly recommend to clean the rails before lubrication. Put a zip tie through the very last holes to ensure the block can not escape the rail. Fill a glass with some grease solvent and soak the blocks for at least an hour. Rinse the blocks and wipe the rail from any residue grease with a lint-free cloth. Lubrication We recommend to lubricate the ball races and bearing balls with grease, and cover the entire rail itself in a thin coat of grease to prevent oxidation. Recommended lubricants (in no particular order): CPC Lubrication Kit 18G Fuchs Planto Multispray S Fuchs Lagermeister BF2 Mobilux EP 1 or EP 2 HIWIN G05 Note: lubricants containing MoS2 or graphite must not be used.

Variants from €12.99*
€19.99*