Nobufil ABS-X, Lime Green, 1.75 mm, 1 kg

StealthBurner RGB LED Kit, pre-wired. Total of three SK6812 RGBNW LEDs. Wire terminated with 3-pin Molex Microfit 3.0 connector. Hint Use our prepared connection cable StealthBurner RGB LED Wire Harness to update your wire harness. Note The M42 hexnut and 3D printed parts are not part of this kit and are pictured for demonstration purposes only.

Das ABS-Filament von Nobufil wird aus recycelten Kunststoffen hergestellt. Dabei handelt es sich um Produktionsabfälle, die bei der industriellen Verarbeitung anfallen. Durch spezielle Modifikation neigt dieses Material im Gegensatz zu Filamenten aus herkömmlichen ABS zu deutlich weniger Warping und weist eine reduzierte Geruchsbildung auf. Dadurch ist auch eine Verarbeitung auf Druckern mit offenem Bauraum möglich. Die physikalischen Eigenschaften von Nobufil ABSx umfassen eine hohe Zugfestigkeit und Steifheit. Außerdem weist es eine gute Wärme- und Chemikalienbeständigkeit auf. Gedruckte Teile können anschließend einfach nachbearbeitet werden. Dadurch eignet sich dieses Material besonders für die Herstellung von Prototypen, Modellen und Kleinserien von technischen Teilen. Temperaturbeständigkeit bis ca. 90°C Breite Farbpalette durch geringe Eigenfarbe Einfache Verdruckbarkeit auch mit offenem Bauraum Geringe Geruchsentwicklung Hohe Detailgenauigkeit auch bei komplexen Geometrien Print Settings Print temperature: 260°C ± 10 Bed temp: 100°C ± 10 Printing surface: textured PEI sheet Fan speed: max 15%

ABS is a real expert in durability. Prints made using this filament are characterized by their hardness and high impact resistance. They are also resistant to high temperatures and abrasion. These properties extend the possibilities of ABS application. The advantages of ABS will certainly be appreciated by designers and engineers. The prints can be used to create concept models for new products or even their final versions. ABS can also be used in production, especially in prototyping more rigid elements. Application PROTOTYPES: linking elements, elements which require high temperature resistance TOOLS OR THEIR ELEMENTS: gears, racks, elements which require high durability GADGETS OR THEIR PARTS: phone cases, stands, keychains TOYS: bricks, robots or their parts, car elements HOUSE EQUIPMENT: hangers, flower pots, vases Properties high hardness high impact resistance resistance to high temperatures and abrasion can be processed mechanically and chemically Print Settings Print temperature: 255°C ± 10 Bed temp: 100°C ± 10 Printing surface: textured PEI sheet Fan speed: max 10%

The silicone heatmats were custom designed by Fermio Labs and made to spec by Keenovo. All heaters are optimized for our build plates shapes and hole positions. They allow even heating almost all the way to the edges of the build plate. The power is adjusted to allow running them at 100 % power without risking damage to the build plate instead of the 50% to 80% PWM limit recommended for the heaters listed on the BOM. The standard DIN466 thumb nuts used in all Voron printers used as spacers (VORON2) or levelling nuts (Trident, VORON0 and VORON1) can be used as guides to align the heater. For added safety all heaters come with a self resetting bi-metal 150C thermostat. This turns off the heater if temperatures reaches 150 C due to technical failure of your electronics (only meant as a safety feature, not for temperature regulation). Thermistor used is a NTC 100K thermistor (Beta 25/50 3950K-1%, click here for the R-T datasheet) Choose type 11 or 13 in Marlin firmware. Use "Generic 3950" in Klipper. SKU/Model Compatibility Dimensions Voltage Watt Ampere Thermostat FLG-VRN-KNV-110 VORON0 110 x 110 mm 24 V/DC 60 W 2.5 A 150° C FLG-VRN-KNV-240 250 Trident, VORON1, VORON2 240 x 240 mm 230 V/AC 300 W 1.3 A 150° C FLG-VRN-KNV-290 300 Trident, VORON1, VORON2 290 x 290 mm 230 V/AC 400 W 1.7 A 150° C FLG-VRN-KNV-340 350 Trident, VORON2 340 x 340 mm 230 V/AC 500 W 2.1 A 150° C

Nevermore offers its own premium carbon of unmatched specifications through selected Voron resellers. Its the best activated carbon for 3D printer use we have found after speaking to most major, vetted suppliers, offering benzene adsorption of up to 48 wt%, surface area of 1250 and CTC value of 80. It doesn't come cheap compared to bulk carbon from amazon, but its safe, has unbeatable performance, and every purchase supports the nevermore project by at least a dollar. CTC(wt.%): 80 Surface area(m2/g): 1250 Density: 420g/L Ball pan hardness: >98 Benzene adsorption(wt.%): up to 48

Contents 1 pcs. Gates PowerGrip® GT® 2 Idler