OMRON D2F-5L Microswitch
Picture similar to product
€2.99*
Content: 1 piece
In stock, delivery time 2-5 working days
Product number: OMR-D2F-5L
Product information "OMRON D2F-5L Microswitch"
Endstop Microswitch usable for X/Y/Z.
Type: D2F-5L
Rating: 250 V/AC - 5A
Properties "OMRON D2F-5L Microswitch"
| Annex / Model: | K3 |
|---|---|
| Annex / Spec: | 180 |
| Voron / Model: | Legacy, Switchwire, Trident, VORON0 V0.1, VORON0 V0.2, VORON1 V1.8, VORON2 V2.4 |
| Voron / Spec: | 120, 230, 250, 300, 350 |
Bill of Materials for "OMRON D2F-5L Microswitch"
Our Bill Of Materials is a usefull tool while sourcing your VORON.
| Model / Spec | 120 | 180 | 230 | 250 | 300 | 350 |
|---|---|---|---|---|---|---|
| Annex K3 | 2 | |||||
| VORON Legacy | 3 | |||||
| VORON Switchwire | 3 | |||||
| VORON Trident | 3 | 3 | 3 | |||
| VORON0 V0.1 | 3 | |||||
| VORON0 V0.2 | 3 | |||||
| VORON1 V1.8 | 3 | 3 | ||||
| VORON2 V2.4 | 3 | 3 | 3 |
Login
Top
ALL
Brass Heat Insert, 5 x 4 mm, M3
Brass heat inserts, specially developed for FDM 3D printed parts and post-insertion.
Content: 100 piece (€0.09* / 1 piece)
€8.99*
Top
ALL
StealthBurner RGB LED Kit
StealthBurner RGB LED Kit, pre-wired. Total of three SK6812 RGBNW LEDs. Wire terminated with 3-pin Molex Microfit 3.0 connector. Hint Use our prepared connection cable StealthBurner RGB LED Wire Harness to update your wire harness. Note The M42 hexnut and 3D printed parts are not part of this kit and are pictured for demonstration purposes only.
€5.99*
> 500 available
Top
ALL
Round Neodym Magnets, 6 x 3 mm, N52, coated black, electrically non conductive
Round neodym magnet, 6 x 3 mm, N52 (≤ 80 °C), epoxy coated black. Note Electrically non conductive.
Content: 10 piece (€0.30* / 1 piece)
€2.99*
Top
V24
TRI
Voron X/Y Microswitch Endstop
DIY X/Y Microswitch Endstop PCB. This PCB is compatible with our Wire Harness! Soldering and printed part required. Contents 1x PCB 1x 4-Pin black JST-XH compatible connector Note: you need two Omron D2F-5L or similar microswitches! Download Microswitch_Edge_Pod.stl
€2.99*
Top
ALL
SSR DIN Rail Mounting Adapter
Adapter plate for mounting an SSR relay on a top-hat rail. Full metal anodized with spring claw.
€3.99*
Top
ALL
Voron Nozzle Endstop
DIY Z Endstop PCB, requires custom printed part and soldering. Contents 1x PCB 1x 3-Pin JST-XH connector 1x Omron D2F-5L Hint Use our prepared connection cable Nozzle Endstop Wire Harness Downloads Z-Switch_FermioLabs_Rev1.stl Note Pins of the connector and microswitch have to be cutted very flat before soldering!
€4.99*