Picture similar to product
Content: 1 piece
In stock, delivery time 2-5 working days
Product number: OMR-TL-Q5MC2-2M
Product information "OMRON TL-Q5MC2-2M Inductive Probe"
Genuine OMRON TL-Q5MC2 2M NPN NC inductive sensor, suitable as Z probe, with a 5mm sensing distance.
- does not sense Aluminium early enough. Requires a spring steel sheet
- needs longer screws than the BOM sensor (2x M3x25 instead of M3x20)
Properties "OMRON TL-Q5MC2-2M Inductive Probe"
|Voron / Model:||Legacy, Switchwire, Trident, VORON1 V1.8, VORON2 V2.4|
|Voron / Spec:||230, 250, 300, 350|
Bill of Materials for "OMRON TL-Q5MC2-2M Inductive Probe"
Our Bill Of Materials is a usefull tool while sourcing your VORON.
|Model / Spec||120||180||230||250||300||350|
0 of 0 reviews
SSR DIN Rail Mounting Adapter
Adapter plate for mounting an SSR relay on a top-hat rail. Full metal anodized with spring claw.
> 500 available
OMRON D2F-5L Microswitch
Endstop Microswitch usable for X/Y/Z. Type: D2F-5LRating: 250 V/AC - 5A
StealthBurner RGB LED Kit
StealthBurner RGB LED Kit, pre-wired. Total of three SK6812 RGBNW LEDs. Wire terminated with 3-pin Molex Microfit 3.0 connector. Hint Use our prepared connection cable StealthBurner RGB LED Wire Harness to update your wire harness. Note The M42 hexnut and 3D printed parts are not part of this kit and are pictured for demonstration purposes only.
igus® e-chain® E2i.10, 19 chain links, opens inside
Genuine igus® e-chain® energy chain, series E2i.10.10.018.0. Inner radius of 18mm. Flexible ends. Fully assembled. Opens to the inside. Suiteable for X and Y axis.
Variants from €14.99*
> 500 available
Round Neodym Magnets, 6 x 3 mm, N52, coated black, electrically non conductive
Round neodym magnet, 6 x 3 mm, N52 (≤ 80 °C), epoxy coated black. Note Electrically non conductive.
Content: 10 piece (€0.30* / 1 piece)
Voron Nozzle Endstop
DIY Z Endstop PCB, requires custom printed part and soldering. Contents 1x PCB 1x 3-Pin JST-XH connector 1x Omron D2F-5L Hint Use our prepared connection cable Nozzle Endstop Wire Harness Downloads Z-Switch_FermioLabs_Rev1.stl Note Pins of the connector and microswitch have to be cutted very flat before soldering!