Knurled Nut, M3, DIN466-B
Picture similar to product
€0.49*
Content: 1 piece
In stock, delivery time 2-5 working days
Product number: OGN-DIN466-M3
Product information "Knurled Nut, M3, DIN466-B"
Flat knurled nuts are suitable for universal use and can be tightened and loosened easily without tools.
Properties "Knurled Nut, M3, DIN466-B"
| Knurled Nut / DIN: | DIN466-B |
|---|---|
| Knurled Nut / Thread Size: | M3 |
| Voron / Model: | VORON1 V1.8 |
| Voron / Spec: | 250, 300 |
Bill of Materials for "Knurled Nut, M3, DIN466-B"
Our Bill Of Materials is a usefull tool while sourcing your VORON.
| Model / Spec | 120 | 230 | 250 | 300 | 350 |
|---|---|---|---|---|---|
| VORON Legacy | |||||
| VORON Switchwire | |||||
| VORON Trident | |||||
| VORON0 V0.1 | |||||
| VORON1 V1.8 | 3 | 3 | |||
| VORON2 V2.4 |
Login
October 17, 2021 09:10
Good quality
Blacky enough, works as expected, thread is good. With the build plate, graviflex magnet, springsteel sheet, PEI and Misumi 5x32mm probe shaft, all from fermio, I had to add a 0.8 shim above each knurled nut, under the bed, to have the z endstop shaft at a perfect position.
Top
Brass Heat Insert, 5 x 4 mm, M3
Brass heat inserts, specially developed for FDM 3D printed parts and post-insertion.
Content: 100 piece (€0.09* / 1 piece)
€8.99*
Top
StealthBurner RGB LED Kit
StealthBurner RGB LED Kit, pre-wired. Total of three SK6812 RGBNW LEDs. Wire terminated with 3-pin Molex Microfit 3.0 connector. Hint Use our prepared connection cable StealthBurner RGB LED Wire Harness to update your wire harness. Note The M42 hexnut and 3D printed parts are not part of this kit and are pictured for demonstration purposes only.
€5.99*
Top
V24
TRI
Knurled Nut, M4, DIN466-B
Flat knurled nuts are suitable for universal use and can be tightened and loosened easily without tools.
€0.49*
Top
Voron Nozzle Endstop
DIY Z Endstop PCB, requires custom printed part and soldering. Contents 1x PCB 1x 3-Pin JST-XH connector 1x Omron D2F-5L Hint Use our prepared connection cable Nozzle Endstop Wire Harness Downloads Z-Switch_FermioLabs_Rev1.stl Note Pins of the connector and microswitch have to be cutted very flat before soldering!
€4.99*
%
Top
SSR DIN Rail Mounting Adapter
Adapter plate for mounting our SSR to our DIN rails.
€3.99* €4.99* (20.04% saved)
> 500 available
Top
OMRON D2F-5L Microswitch
Endstop Microswitch usable for X/Y/Z. Type: D2F-5LRating: 250 V/AC - 5A
€2.99*