Saw cut, precision milled and stress relieved cast aluminium plates. These are meant for DIY enthusiasts who want to create their own build plates. Made from the same raw material we use for our famous build plates!

Saw cut, precision milled and stress relieved cast aluminium plates. These are meant for DIY enthusiasts who want to create their own build plates. Made from the same raw material we use for our famous build plates!

Saw cut, precision milled and stress relieved cast aluminium plates. These are meant for DIY enthusiasts who want to create their own build plates. Made from the same raw material we use for our famous build plates!

Saw cut, precision milled and stress relieved cast aluminium plates. These are meant for DIY enthusiasts who want to create their own build plates. Made from the same raw material we use for our famous build plates!

17 teeth gear in brass with M3x3 setscrew used in Bondtech BMG, Single and Dualdirect extruders. Please make sure that the setscrew does not collide with the secondary plastic gear when assembled.

Suitable for Pocketwatch 1 extruder.

Misumi VORON frame kits contain all needed aluminium extrusions, machined to spec (holes and tapped ends). Note: our VORON2 V2.4 frames do not include nor need 4 pcs of 90° angled corner cubes.

Misumi VORON frame kits contain all needed aluminium extrusions, machined to spec (holes and tapped ends). Note: our VORON2 V2.4 frames do not include nor need 4 pcs of 90° angled corner cubes.

Misumi VORON frame kits contain all needed aluminium extrusions, machined to spec (holes and tapped ends). Note: our VORON2 V2.4 frames do not include nor need 4 pcs of 90° angled corner cubes.

RobotDigg miniature linear guideway; single rail cut to length with a single long block. Highest preload (Z1) and normal (N) precision guarantees a stiff / play-free and binding-free motion. Warranty The blocks and rails are non-interchangeable - keep the blocks on the rails! A violation does expire warranty effectively. Cleaning We strongly recommend to clean the rails before lubrication. Put a zip tie through the very last holes to ensure the block can not escape the rail. Fill a glass with some grease solvent and soak the blocks for at least an hour. Rinse the blocks and wipe the rail from any residue grease with a lint-free cloth. Lubrication We recommend to lubricate the ball races and bearing balls with grease, and cover the entire rail itself in a thin coat of grease to prevent oxidation. Recommended lubricants (in no particular order): CPC Lubrication Kit 18G Fuchs Planto Multispray S Fuchs Lagermeister BF2 Mobilux EP 1 or EP 2 HIWIN G05 Note: lubricants containing MoS2 or graphite must not be used.