Voron Carbon Fiber X Gantry, 250 spec

Light weight carbon fiber X gantry replacement for Voron 2 & Trident. much lighter than aluminium extrusion suits MGN12 rigid 2mm wall design includes mounting/installation hardware Please choose the appropriate length tube for your machine and/or see below for more information and technical specifications. This carbon fiber x gantry replacement was developed after testing and trialing some of the carbon fiber gantry replacement options available in market. Size 250 spec = 330 mm length 300 spec = 380 mm length 350 spec = 430 mm length Features much lighter than the aluminium counterpart Alu X CF X Weight Saved 330 mm 156 g 66 g 90 g 380 mm 180 g 78 g 102 g 430 mm 202 g 86 g 116 g drop in replacement on all existing spec Voron 2 and Voron Trident models (250 / 300 / 350) adequate mounting holes for MGN12 linear rails adequate access to all rail/top mounting screws / nuts multiple mounting points for chains and alternative toolhead wiring solutions like Roadkill toolhead pcbs using flat/ribbon style cables tested to an operating temperature of 90c What’s included carbon fibre square tube 2x 250mm length 5mm carbon rod – diameter tolerance of 4.96-4.99mm (for other weight saving projects / mods) 10x M3 flanged and serrated hex nuts (since 16th of March 2023) 10x M5 flanged and serrated hex nuts (since 16th of March 2023) M3 5.5mm hex nut driver (since 16th of March 2023) Installation Our tube uses the spec Voron mounting pattern / locations for the top and bottom M5 bolts as described in the manual assembly instructions for both Voron 2 and Voron Trident so there is no difference from standard gantry assembly. The tube is also 2020 in dimension, matching the specced aluminium extrusion and compatible with the rail centering printed parts. There are 2 changes from standard manual assembly: Printed hex nut holders are needed and inserted into the square tube to secure and align the hex nuts for the incoming M5 bolts that attach the X gantry to the XY joints. As the carbon gantry does not have slots or channels in the center of the faces, alternate XY joints are required to be printed that do not have locating notches that usually go into the slot of the aluminium extrusion. These are the stock XY joints with the locating notches removed. For further modification and weight reduction in addition to the carbon fibre gantry. The pins mod is available here from Woki Leo. https://github.com/Woki-Leo/Carbonfiber-X-Axis *WARNING* Cutting carbon fiber releases dangerous and harmful particles when cut. Please be aware and take the necessary precautions. https://www.monash.edu/ohs/info-docs/chemical-management/carbon-fibre-composites-ohs-information-sheet

Fermio Labs miniature linear guideway; single rail cut to length with a single long block. Highest preload (Z1) and normal (N) precision guarantees a stiff / play-free and binding-free motion. Unlike most of the linear guideways produced in China, our blocks feature a functional injection hole / grease port for lubrication which is compatible with our lubrication kit. Warranty The blocks and rails are non-interchangeable - keep the blocks on the rails! A violation does expire warranty effectively. Cleaning We strongly recommend to clean the rails before lubrication. Put a zip tie through the very last holes to ensure the block can not escape the rail. Fill a glass with some grease solvent and soak the blocks for at least an hour. Rinse the blocks and wipe the rail from any residue grease with a lint-free cloth. Lubrication We recommend to lubricate the ball races and bearing balls with grease, and cover the entire rail itself in a thin coat of grease to prevent oxidation. Recommended lubricants (in no particular order): CPC Lubrication Kit 18G Fuchs Planto Multispray S Fuchs Lagermeister BF2 Mobilux EP 1 or EP 2 HIWIN G05 Note: lubricants containing MoS2 or graphite must not be used.

Brass heat inserts, specially developed for FDM 3D printed parts and post-insertion.

Optical sensor PCB for TAP including adapter cable to our wire harness for Plug&Play (For the 5V version you need to ensure 5V, we are working on some documentation. You can also open a ticket for some help!).INFO: (Updated 5.1.23)  At the moment we deliver a 5V only version and we removed U2 from the PCB. There are some issues with the official design. Even with some intermediat solusions we see remaining risk. Warning Do not connect or disconnect the PCB when the printer is powered! Technical Data 5V supply voltage only Open drain signal output Optional 10k pull-up (against +5V) on signal output (via solder bridge) OPB971N51 sensor Contents 1x full assembled and 100% tested PCB 1x short cable (JST-PH => Molex Microfit 3.0)

Round neodym magnet, 6 x 3 mm, N35H (≤ 100 °C), nickel plated. Note Electrically conductive.

Round neodym magnet, 6 x 3 mm, N52 (≤ 80 °C), epoxy coated black. Note Electrically non conductive.